Empire Reloader "B2" board

[rkjunior303]

Has anyone had any experience with these? I recently updated an old halo with this and it seemed to be working fine all day, until the last 2 games.. First, it wouldn't feed when the gun was shooting then finally when you turned it on it would spin the motor uncontrollably -- even with no sound. It was weird. It acted almost like a normal halo, but it wouldn't stop spinning.

[FallNAngel]

Yeah, sounds like you didn't follow the directions when turning it on...

The hopper has to be empty when you turn it on. ie. Turn the hopper on, *then* fill it.

[rkjunior303]

Have you used the B2 version of the board? It's different from the normal run of the mill reloader b board... i have a normal reloader b in my other halo and ive NEVER filled it first, except for generally the first game of the day..

As for this, it was working fine ALL day until the final game. Why would it work for 6 hours then all of a sudden not like how I was using it?

[FallNAngel]

Alright then, so the hopper is empty, you turn it on and the motor just spins? Assuming it's abnormal (otherwise, why would you be posting), only things I can think of are:

Low batteries (try another set, even if the ones you have are new)
A short somewhere (unlikely)
A bad board.

[rkjunior303]

Why are you bothering to answer if you've never had any experience with the Reloader B2 board? You're not helping.

[rkjunior303]

Not to come off as a complete prick, but c'mon. I'm not some noob to a reloader b. i've had them for quite a while.. this is a pretty specific question to a very specific problem..

[ntn4502]

prick

[jenarelJAM]

prick

kinda not helping...

Did you call up empire and ask what they thought?

[rkjunior303]

don't worry, nelson knows i'll beat him down next time i see him. i sent them an email.

[Bolter]

My team Manager has drilled little holes through the body of the old shells under where the on/off button is, because we found the new B2 board upgrades werent feeding properly, and well, we think the sound senser wasnt hearing the gun. Drilling the holes up into the shell (right above where the bolt is) allowed the sound in.