micro mag?

[PnueMagger]

anything with a ULE body will be lighter than a Micro mag. A micromag will be lighter than a standard mag. All mags are basically the same size. This is due to the fact that they all use relatively the same size valve, Sear, breech, and frame placement. You may find that a classic rail will bring the front grip closer to frame and can br ule milled for weight reduction. For simple sniping, I reccomend putting a 3.5oz co2 tank directly on the vert ASA and running a warpfeed. super low profile if your looking for a sniper with not a ton of firepower.

However just upgrade to x-valve and a remote HPA for massive mowage.

[paintballonthebrain]

Im going to put specops turny gun to woods ball gun stock on there. its pretty kool its just like the long bow stock with out the shroud over it, and it mounts to the grip like a dropforward (there is an air thru version that i would like to get). The x-value and hp sound good but im 15 with a part time job with a truck that needs alot of work before my 16th in about 2 mounths.

[PnueMagger]

You'll need an RTP style rail with the holes on the side. Perhaps go pnuemag. It isn't to costly to do yourself ($50 at most if you got the tools).

[paintballonthebrain]

the stock mounts on the bottom of the grip were the asa goes, and i want to keeps this a mech. and one of the reseons i picked atuo mag was because of all the good stuff i heard about the mechs. By how small auto mags are i dont need to worry about weight i normally carrying my heavy 98 aroung for and hour at a time.

[PnueMagger]

pnuemags are very fast mechs. there is no batteries required

[paintballonthebrain]

oh cool in that case what tools do yoy need to do this, and do i need the x-value?

[paintballonthebrain]

well im going to bed it would be cool if you could get me a link to the stuff for the peumag. and anything esle you think i should do. keep in mind that im a woods/senario player that means no shiny stuff that will get me shot.


thanks

[PnueMagger]

search "phishphen" in the the search bar. h

[Rudz]

hmmm

Well we were just havin fun..and yes I'd do it to him if he had 3000 posts.I'd do it to anyone really...and neppo did help him...plus no one has even linked him to the tactical mag thread in the workshop..or mentioned the new tac body..and even a tac 1 for that matter.....that's what this kid needs..not everyone wants a pnuemag..or can make one....this kid needs a tac 1..warp body and he's set....

Airgun.com

Go to the online store...look at the tac one..warp feed..and now save your money..now how hard was that.....

[PnueMagger]

Mmmm tac1 warps. Now that's a nice setup.

[Coralis]

might want to read this thread before making any purchases ..... its long and does get off track some but does have some good information Automag tactical discussion

[paintballonthebrain]

well im going to start small and work on getting the pro classic with lv 10 anti-chop. Then i might try that peumag conversion.

[nate2k191]

i'd recommend the pro classic or a tac-one/tac-one warp body, classic valve (unless you plan on upgrading it to shoot over 12-15bps) and a carbonfiber barrel (i hear they are accurate and quiet).

for compact, get a vertical asa or run a remote line, i'm pretty sure you can get 13ci 3000psi HPA tanks if you want a small one.