if any one knows out there let me know.... can u get a regular turtle body and put it on any cocker no matter what or would there have to be milling or something else??...pm me if you can help me out because im interested in buying a turtle body
-
-
I belive that it will fit on any regular cocker stuff, the only thing diffrent obviously is the bolt, bolt pin and back block
you might want to get a second opinionhttp://www.directaffect.com/dev/jason/ao_states/images/ao_mi.gif
http://www.colorspaintball.com/
http://www.mayhemsports.net/ -
True dat.....
The turtle cocker should come with the bolt, back block, and pump rod that it needs to operate. Everything else is standard cocker stuff.
One other thing to watch for is that many turtle cockers are "mini" as well. That means that you will either need an ASA to 1/4" adapter, or that you get a front block with the ASA built as one ala WGP.Last edited by punkncat; 06-05-2006, 04:02 PM.Comment
-
-
Dont forget the custom Hammer. Bolt pin goes through the bolt and body and grabs the milled hammer.Comment
-
QFTOriginally posted by pol
Yeah, I'm a mod there, and I highly recommend it for any halfblock questions. The only real concern with the turtle bodies is if you plan on running an MQ valve. If are going to, I believe you need a special sleave for it to fit properly. Plus the type of e-frame you run will determine what type of MQ you have to use (E-blade and Race are a little different from what I hear).
If you're going all mech, you should have no problems
Comment
-
Comment