Blue Loc tite

[Carbon Blue]

Ive used some blue loc tite on the threads for my feedneck (rogue strangler) and was wondering how some of you out there have removed it from the body? If you guys boiled your bodies how long did you let the body sit in a boil for? Any tips on how to remove the strangler once the rotating shroud is off? I was thinking a strap wrench, but the notched inside would probably cave in from the force the strap wrench exerts. Any tips would be appreciated thanks!!

oh one more question, are trigger pins reuseable after being pressed out?

[BeaverEater]

take a strap wrench and put it as low as you cant on the feedneck so you dont bend it inward. Blue loctite should not need to have anything done to it, its the red that really holds.

[MoeMag]

/\ /\ /\ Is right the red stuff is what you really want. Blue isnt near as strong.

Anyway, the way we do it in the paintball shop is with the body on the frame and all, use a bench to clamp onto the feedneck (use a thick peice of rubber to protect the finnish on the feed neck) then crank it off using the body as a lever.

real easy. even works for the things that are jammed in real good

[Carbon Blue]

thanks you guys

[shorty24]

And yes, trigger pins are most definately reusable after being pulled out

[Carbon Blue]

And yes, trigger pins are most definately reusable after being pulled out