Fitting Size?

[HuD1Ni]

In the mean time while I save money to persue more mag projects, I'm making somthing crazy out of my spyder and all the extra parts I have laying around. I have a question, on the front block of a spyder ( not really a front block, but the thing that the lpc and the forgrip screws into ) What is the size of that fitting ? it's a little smaller than a tank fitting. What I ideally want is a reducer that is that size to a 1/8.. if you don't understand what i'm talking about i'll explain better

[Cow hunter]

In the mean time while I save money to persue more mag projects, I'm making somthing crazy out of my spyder and all the extra parts I have laying around. I have a question, on the front block of a spyder ( not really a front block, but the thing that the lpc and the forgrip screws into ) What is the size of that fitting ? it's a little smaller than a tank fitting. What I ideally want is a reducer that is that size to a 1/8.. if you don't understand what i'm talking about i'll explain better

the reg thing will fit a tank just fine, the sorta vert adapter that has a reg or foregrip thing i mean...

[NewbieMagMan10988]

Are you talking about the fitting for a spyder LPC? Just going to clarify..... But i dont really know the size. What exactly are you looking to do, we might be able to help more....


Mike

[HuD1Ni]

the reg thing will fit a tank just fine, the sorta vert adapter that has a reg or foregrip thing i mean...

I'm not talking about the tank or reg, I was refering the "front block"



I need some reducer that can fit in the circled area and have a male 1/8 end

i'm freaking out a spyder is what i'm doing.. QEV's and ****, i'm making this as consistant and as efficient as possible.. and right now i'm just testing stuff out


EDIT: https://palmer-pursuit.com/ecom/prod...712e4a0f551d35

I want somthing like that but one end fits into the front of the block like the LPC does, and the other end is a 1/8

[ttink]

Try pm'ing druid or ottersc here. They really know what they are talking about and the guys on KUSA are very helpful in general. You actually might try posting something in the general spyder section to see if you get an answer as well.

EDIT: depending on what you are wanting to put in there, you could also just drill and tape the front of the LPC.... im not sure if that would work or look good for what you are doing though, cuz im not exactly sure what you are doing lol.

[HuD1Ni]

Try pm'ing druid or ottersc here. They really know what they are talking about and the guys on KUSA are very helpful in general. You actually might try posting something in the general spyder section to see if you get an answer as well.

EDIT: depending on what you are wanting to put in there, you could also just drill and tape the front of the LPC.... im not sure if that would work or look good for what you are doing though, cuz im not exactly sure what you are doing lol.

thats what I think i'm going to have to do

[NewbieMagMan10988]

Yeah, try Otter...Palmer/punisher might be able to whip something up for you, but it wont be fast/cheap.

Good luck with your project!

Mike

[HuD1Ni]

Yeah, try Otter...Palmer/punisher might be able to whip something up for you, but it wont be fast/cheap.

Good luck with your project!

Mike

thanks man, I have some milling tool in my garage, so I think i'll just tap some 1/8 in there and move on, thanks though !

[SR_matt]

you could get one of the vert grip adapters that u have there but that does not have the LPC hole (i think there are some) and then just tap it.

-matt

[ttink]

you could get one of the vert grip adapters that u have there but that does not have the LPC hole (i think there are some) and then just tap it.

-matt

That only comes on the long bodied spyders and will not work on the compact ones. i could be wrong however.

[HuD1Ni]

That only comes on the long bodied spyders and will not work on the compact ones. i could be wrong however.

i'll just tap the lpc, doing that will also give me another air resevoir (sp?) which will help a ittle more on co2