Shocker pressure-setting?

[Lenny]

I know this is the AO forums, but I almost hate PBN and don't have a SO account. So...

I got a new Shocker that I'll probably post pics of when it's completed (only a few more things). I have a New Designs LPR vert ASA and a Max-Flo LPR. I'm waiting on one more barb to be able to connect it; then it will be completely operational. So I was wondering, with this upgrade, how do I set the maker pressures?

I turned off the LPR so I could get a read-out to 100psi through the HPR, and then replaced that ASA with the stock one to adjust the dwell up to 1ms above complete bolt cycle. How would I then adjust the solenoid and velocity? I assume the velocity like normal (via HPR), but what signs would I be looking for with the solenoid? It doesn's connect through a guage, so I can't tell the LPR pressure.

So, how would I further adjust it?

Thank you.

P.S. - For flaming reasons: I am a happy Automag owner, and have been for two years. So don't go hate'n!

[master_alexander]

12 mags//2 shockers

although i cant help you, this is probably the only reason why i like PBN..

[Lenny]

Kinda sad... You're the only reply...

[jamerson]

Ok loose the lpr and put the stock or non lpr asa back on. then you want to remove the filter which is on the left rod that screws in under the bolt. It will also helh if you install an efficancy botl any brand. When i bought all my shocker parts i just bought aftermarket smart parts stuff. But you can get any brand you want. If you really want the lpr go ahead , but get ready for the head ache.

[lather]

Kinda sad... You're the only reply...

Not many Shocker owners use LPRs since they do nothing for a Shocker. Ask Ydna or Im sure someone on Shockerowners.com will be able to help.

[Ydna]

With the LPR installaed and working you'll only be able to drop the pressure 10-20 psi under the input. Many people go out and try to use it at sub-100 psi levels and are thusly confused as to why the gun won't work...