My Pneumag!!!! Yes!!!!!

[the mag guy]

its completed and just about where i like the trigger to be. here's three pics, but the rest are available here! Were talking >1mm trigger pull, and I'm not gonna guess on the weight of the pull. fairly light. hard to start walking, but when you do...

http://s111.photobucket.com/albums/n135/themagguy/

here's my baby :

[the mag guy]

oh yeah, teh specs:

12" Stiffi Barrel
Ule Body
X-valve w/ LX and ULT
I made my rail! (i still need to wire wheel it, but i painted it for this pic)
AGD front grip (the new RT grip right?)
RPG Chimera w/ splinter trigger
Mpa-3, FabCo 3-way and WGP Tickler pneus
Psycho ballistics 6" drop
Nitro Duck 114Cu in 3000 psi, 800 psi fixed output
Black Halo B (not pictured b/c its in the mail)


Vids will follow sometime this week or early next, it depends when my halo arrives and my trigger adjustments.

[MANN]

nice setup. I like the jerzys also. Any video?

[the mag guy]

Vids will follow sometime this week or early next, it depends when my halo arrives and my trigger adjustments.

hopefully sooner than later

[the mag guy]

vid!

ok so i got excited and made a video.
i dont like my trigger, but its all downhill hill form here. It'll be screamin' soon.

[Pneumagger]

nice! Good clean setup on the frame. put that LPR in the frame!!!

[the mag guy]

i do have a question on that though. heres my thoughts:

1. put lpr in frame, and elbow out of the bottom.
2. use the "T" i have and go form the asa to the prip and then form the grip to the X-valve


or


1. same as above # 1
2. run a separate hose from my asa ( i have a second hole) to the lpr and keep the setup I currently have runninf through the grip and then to x-valve.

or

1. stick lpr on the front ( i have the taps)

or

1. try some one else's suggestion.

[the mag guy]

i'm leavin at 3 pm to go to the local field. nobody has seen my gun yet....

ohh teh violence teh violence!!!

[SocialD]

One quick question

What is the output pressure of your bottle? I was just wondering how much pressure that the tickler can take.

Thanks
-D

[Chronobreak]

what happened to your rail? it looks chewed up

--nm i see you "made " it

at first glance it looked like a logic rail so it was odd to see it all bubbly like that

[Dye Angel Guy]

I don't really get the point of doing it besides it being a cool project...

[SocialD]

I don't really get the point of doing it besides it being a cool project...

So..then..you do get the point.

[armyboot]

I don't really get the point of doing it besides it being a cool project...

And you'll have a mech gun that can shoot F-A-S-T!

[the mag guy]

What is the output pressure of your bottle? I was just wondering how much pressure that the tickler can take.

Thanks
-D

I have a fixed output of 800. And it handles it gloriously.

Chronobreak, Yes I made the rail, I ran out of my wire wheels to buff out all the imperfections. I hit it with a coat of black laquer for the photo. Whenever I feel like making it prettier, I'll go buy some more wire wheels and buff it sexy.

Dye Angel Guy, the are several reasons to do it, but I did it for two reasons. 1, the comments and the jaws hitting the floor when I show them that mags dont suck. and 2, I wanted a mech gun with the smallest possible trigger (it simialr to my old 2k1 Dark angel now) and the best rate of fore in the market. oh i forgot, i wanted all that with no reactivity, a true semi.

I'm modding my MSV-1 to a msv-2 with the guidance of pneumagger. THen the pull will be lighter than ever! (msv-2 is a msv-1 w/ a hinge on it).

[Pneumagger]

(msv-2 is a msv-1 w/ a hinge on it).

Not quite. I've found that the MSV-2 has alot less vent around the stem and exhaust while actuated. More of a slight "pshhhhh" rather than loud "hissss" (onomonopeai = )The stem design is a little different. So it doen't leak like sieve when the trigger is down.