Lubbing up

[paintballfiend]

My mag has a gas-thru grip on it. How would I go about oilling it up? Is there any difference with the gas-thru grip or do I just drop some oil in the ASA. Also, how much oil is necesarry?

[paintman1234]

You should start by making your title a little more specific, then by putting oil (3-4 drops) in the part where your macroline or stainless hose screws into the vlave

ps: these sort of qustions should probly go in the tech section

[wimag]

My mag has a gas-thru grip on it. How would I go about oilling it up? Is there any difference with the gas-thru grip or do I just drop some oil in the ASA. Also, how much oil is necesarry?

you dont need to. Three drops in the ASA is all you need.

[Chronobreak]

you do want to get the oil as close to the valve, but eventualy itl work itself thru the gun

might wanna take the valve halfs apart or remove the on/off and put a drop in em as well

take off the barrel, give it a few shots, then put it back on

[VFX_Fenix]

All those thirsty thirsty O-rings needs their lube. Personally I pop the Q/D off my valve and put oil in the hose before I gas-up since I'm using a Flatline and well.... that's the only place I can really get to for oiling.