Why can't you use a ULT with an Emag?

[RavishingEddie]

Ok I know you can't use one on an EMAG or XMAG. I just want to know why. The reason I am asking is because I am working on a project. Thank you

[JRingold]

I believe it is because the solenoid requires the "return" pressure of the RT valve to reset. The ULE Trigger Kit doesn't push the solenoid back down with enough force.

[m-a-r-k-7]

Isn't the ULT also a lot thinner than the E-mag so at those hisgh speeds its easier to break?

[hitech]

The ULT provides much less return force and doesn't pull the plunger out of the solenoid fast enough. It will work, it just slowes your max ROF.

[RavishingEddie]

The ULT provides much less return force and doesn't pull the plunger out of the solenoid fast enough. It will work, it just slowes your max ROF.

What if I use a smaller solenoid like this one? with a ULT. Actually I already have it, I am just trying to figure out how to attach the plunger to the sear

[Joni]

Yes, a small enough noid works (my hyperframe noid works like a charm with ULT)

[RavishingEddie]

Yes, a small enough noid works (my hyperframe noid works like a charm with ULT)

Cool. So the Hyperframe uses a pull or push type noid? I assume I would have to add some juice from a capacitor. Is 1000 Mah good or more?

[hitech]

What if I use a smaller solenoid like this one? with a ULT. Actually I already have it, I am just trying to figure out how to attach the plunger to the sear

Well, I certainly believe it will work with the preoper solenoid. I've even posted links to the solenoid I think will work.

I'm VERY interested to know the out come of your test. Please remember to let me know the results.

[Joni]

Cool. So the Hyperframe uses a pull or push type noid? I assume I would have to add some juice from a capacitor. Is 1000 Mah good or more?

It's a push noid.

The capacitance of a capacitor is measured in Farad, not ampere hours. The cap in the hyperframe is 10000 micro Farad (10000 uF).

Good luck!