Trigger return spring?

[nevtangle]

I just got a super light switch from Luke for my Hyperframe. It is really really light. Almost too light, but i like it. I can blow on it and it will fire.
I'm affraid that while running it will fire w/ each step.
I want to put a return spring on the back of the trigger. How are the devilmags return springs attached? To the trigger or the frame?
I was thinking of using a portion of a spring from a pen or something similar. Maybe trying to thread it on one of the trigger stops.
Antone have any ideas or can tell me how the devilmags return springs are attached.

Thanks
-N

[warbeak2099]

Maybe trying to thread it on one of the trigger stops.

Bingo

[BigEvil]

I had the same problem with the eframe I made...

Im not sure how the hyperframe is set up, but on mine I drilled a hole right above the top trigger stop (Not all the way though) and dropped three emag trigger magnets in. They pull on the top set screw on the trigger, giving it a better return. IMO much neater than trying to rig a spring.

[personman]

Yeah, magnets are a bit nicer if a pull IMO but a spring on the trigger stop to the grip frame should work fine