Pneumag on a classic RT

[psychowarden]

There is a guy locally that has an RT mag like this one http://www.airgun.com/museum/RT.htm and he barely ever plays anymore. So I would like to see if I could buy it from him and turn it into a Pneumag. Would it be possible? Thanks in advanced.

[personman]

As long as you can get a gripframe that will fit the pneumatics, it will work.

[psychowarden]

Its got an Inteliframe on it right now.

[personman]

That should give you plenty of room.

[psychowarden]

Allright, thanks. Now I just need to get a hold of a warp body :P

[REDRT]

Allright, thanks. Now I just need to get a hold of a warp body :P

No warp body for that RT. Classic RT is uniquely it's own, you can warp it from the either end of the power feed though. The short end you'll need the longer powerfeed plug still available from AGD I think.

[Chronobreak]

also, you could probly do a unique pneumag setup with that useless "utility rail"

[Pneumagger]

you can't pneumag a classic RT. sorry

[Chronobreak]

you can't pneumag a classic RT. sorry

care to explain why?, is the banjo in the way or something?

[Pneumagger]

I did eenie meenie miney moe, and it came out no...so yeah, the answer is it can't be done.

[Arstron]

My eenie meenie miney moe said yes, so it must be possible.

You can pneumag a classic RT, and it is possible to make a ule warp body to fit a classic valve. A ULE body has been installed on a classic RT before, although I dont rember the specifics of it.

[personman]

you can't pneumag a classic RT. sorry

Yes you can.

[REDRT]

You can pneumag a classic RT, and it is possible to make a ule warp body to fit a classic valve. A ULE body has been installed on a classic RT before, although I dont rember the specifics of it.

Yes you can pheumag a Classic RT
NO warp body will bolt to the Classic Rts rail, but now you can't use the Classic Rt valve with that body and you can't use any other valve because there is no slot for the z-pin on the rail. I figure you might be able to mod it one way or the other, but it sure isn't cost effective/practicle. Warp the body it has or not at all. Otherwise move up to a rt pro that is compatable with everything.

[Arstron]

Yes you can pheumag a Classic RT
NO warp body will bolt to the Classic Rts rail, but now you can't use the Classic Rt valve with that body and you can't use any other valve because there is no slot for the z-pin on the rail. I figure you might be able to mod it one way or the other, but it sure isn't cost effective/practicle. Warp the body it has or not at all. Otherwise move up to a rt pro that is compatable with everything.

It is possible to add a ULE body to a classic RT, I guess I should of specified that it does take quiet a bit of modifications to the gun its self. Now that I think about it, I belive the person that did it had to cut part of another body to fit over the valve as well as other mods. I cant find the thread about it though. Anyway I wouldnt recomend trying to do this, I would recomend this instead:

http://lukescustoms.com/page0009.htm

[psychowarden]

For the most part, it will be a tinker gun if I decide to buy it. And I forgot that ULE bodies wont work, but Im sure that I can find a right powerfeed somewhere and just put a warp on that instead. And, since there seems to be some kind of argument about this, why would modding it be any different than any other mag?