Well first yes I finaly made a pneumag. I'v been wanting to do this for awhile and now that i got a job i bought all the stuff including an I-Frame and went ahead and did it. It only took me a weekend to do with a drill press, dremel, and a rotozip, so those that say it's really hard to do it is not as long as your not afraid of it. The parts i used were the:
1. .45 I-Frame
2. MSV-2
3. MPA-3
4. MAR-1P
5. various hosings and fittings
I didn't use the ULT as I didnt have one yet I am still able to walk my gun with no problem. I am not exactly sure on the pull length or weight as I kind of like my trigger pulls long so this was not a factor but after finishing it today , and doing no tuning i can easily walk it and get good short burst shots off. I really wish I had a digital camera so i could upload pics, but yall are just going to have to wait for me to develop some then I will definantly post.
thanks to all the others who posted there mods and the how-to's it really helped
-out
1. .45 I-Frame
2. MSV-2
3. MPA-3
4. MAR-1P
5. various hosings and fittings
I didn't use the ULT as I didnt have one yet I am still able to walk my gun with no problem. I am not exactly sure on the pull length or weight as I kind of like my trigger pulls long so this was not a factor but after finishing it today , and doing no tuning i can easily walk it and get good short burst shots off. I really wish I had a digital camera so i could upload pics, but yall are just going to have to wait for me to develop some then I will definantly post.
thanks to all the others who posted there mods and the how-to's it really helped
-out
Comment