Building Mag But...

[K9nerOPs]

(Discontinued?)

- ULE Warp Left Body (Purchased Already)

- Rail Designed For Warp Left ULE Body (Almost Impossible To Find)

- X-Valve (No Longer Anodized In Diff. Colors By AGD?)

- Vertical Gas Thru Adapter (Purchased Already)

- Front Grip (Screw In) Gas Thru (Purchased Already)

- Q-Loader System (Purchased Already)

- Kapp Drop Zone II Stubby (I Can Only Find It In Green?)

[Shirow]

You can probably find a rail in the sale section of this forum. The vert frames are there also occasionally. A colored X-Valve is tough to find, I know back2integrity has a red one (had?) but other colors are pretty hard to come by.

[Tool-of-death]

You have to get your rail milled by AGD or tunaman for the warp.

Rouge Factor said they were going to do anouther run of vert frames in a few weeks.

[K9nerOPs]

You can probably find a rail in the sale section of this forum. The vert frames are there also occasionally. A colored X-Valve is tough to find, I know back2integrity has a red one (had?) but other colors are pretty hard to come by.

i'll keep an eye out form the rail & vert...thanks!!!

You have to get your rail milled by AGD or tunaman for the warp.

I never really like the stock look of AGD...I love the sharp looking razor edge rails...

Rouge Factor said they were going to do anouther run of vert frames in a few weeks.

Rouge Factor is the main contact for Logic's Website?

[CKY_Alliance]

i'll keep an eye out form the rail & vert...thanks!!!



I never really like the stock look of AGD...I love the sharp looking razor edge rails...



Rouge Factor is the main contact for Logic's Website?

ROGUE and logic make two different frames...for rogues stuff go to www.themagsmith.com you can get tons of stuff there..for logic go to www.logicpaintball.com


logic contact coolhand ...and for rogue contact roguefactor

coolhand and roguefactor are there usernames here.....






check the B/S/T forum for used stuff you can get good deals and get stuff thats discountinued...

for the kapp drop..youll prolly have to get it used, they went out of buisness some places may still have them...oh and ebay its your friend...also tunaman can provide you with lots of stuff also




thanks for the correction tool....i dont keep up with the stuff much anymore...



oh and K9 i dont know if you've seen them or not..but look for deadly wind body/railes, the dallara , karta, and chord V1 and V2...very nice stuff..quality used to have one and loved it ,so light and sexy, kinda pricey but worth every penny, unfortuantly they dont make them anymore at this time.

[WARPED1]

Are Mags not as popular anymore? This forum is very active leaving me to believe Mags are still a hot item. Are Airgun Designs & 3rd Party Man. not producing what used to be in production? If so where are the news parts?

Virtually the only place you'll fing Mags or Mag shooters are here and the few Dealers here(like The Mag Smith). You will not find any mags in national tournaments or any magazine/websites(other than the few mag specific dealers here). If you have your heart set on a mag, buy from like Tunaman Here on AO( www.tunamart.com I think), he should be able to set you up, or cruise the B/S/T forum here. If you want a gun with parts you can get immediately, buy a cocker or Etek Ego or P/DM6 or some such.

[Tool-of-death]

ROGUE and logic make two different frames...for rogues stuff go to www.themagsmith.com you can get tons of stuff there..for logic go to www.logicpaintball.com


logic contact nicad...and someone else i dont remeber..and for rogue contact roguefactor

nicad and roguefactor are there usernames here.....


umm either luke is nicad or luke is the other person for logic..i dont remeber anymore....



check the B/S/T forum for used stuff you can get good deals and get stuff thats discountinued...

for the kapp drop..youll prolly have to get it used, they went out of buisness some places may still have them...oh and ebay its your friend...also tunaman can provide you with lots of stuff also

rougefactor = htttp://www.themagsmith.com/
coolhand= http://www.logicpaintball.com/
nicad= http://www.deadlywind.com

[WARPED1]

Virtually the only place you'll fing Mags or Mag shooters are here and the few Dealers here(like The Mag Smith). You will not find any mags in national tournaments or any magazine/websites(other than the few mag specific dealers here). If you have your heart set on a mag, buy from like Tunaman Here on AO( www.tunamart.com I think), he should be able to set you up, or cruise the B/S/T forum here. If you want a gun with parts you can get immediately, buy a cocker or Etek Ego or P/DM6 or some such.

Oh, and you'll spend less money buying a newer gun, with possibly more features. Paint can be expensive at some fields still!

[K9nerOPs]

CKY_Alliance & Tool-of-death, thanks for the Contacts...I will be lurking around...

If you want a gun with parts you can get immediately, buy a cocker or Etek Ego or P/DM6 or some such.

[WARPED1]

Not any more, the LX kit made mags harder to tune, field stripping is still easy.
And every gun I mentioned is accurate and reliable, well, guns are not accurate, its all barrel and paint match

[WARPED1]

Mags are most certainly super easy to field strip, and are very reliable.

No denying that. But try to get mag parts at your local field if your mag breaks down.(I've seen it happen).

[CKY_Alliance]

No denying that. But try to get mag parts at your local field if your mag breaks down.(I've seen it happen).

If you play at paintball charleston..here in SC you have no problem getting parts or even a whole mag....tac,sidearem,classic,rt, emag, maybe and X mag, (i think they still have it), maybe a warp, new valve...along with numerous other mag parts...

[K9nerOPs]

well, guns are not accurate, its all barrel and paint match

I plan on buying that carbon fiber barrel that uses the freak system inserts(Deadlywind.com)...So I Should Be Ok on the accurate part...Right?


Some of the feilds around me have cocker parts (And boy oh boy there are way too many small & large parts for that marker) and tippman parts...but like RogueFactor stated "Ive been to fields that dont have ANY replacement parts, for any markers//and that isnt limited to the mag." I too have seen this in most fields.

[doober]

I didn't really read much of the thread, but anyways i have a ULE'd Emag Rail professionally milled for left warp and ULE'd on the inside PM me if your interested




thanks

[Tool-of-death]

I plan on buying that carbon fiber barrel that uses the freak system inserts(Deadlywind.com)...So I Should Be Ok on the accurate part...Right?


Some of the feilds around me have cocker parts (And boy oh boy there are way too many small & large parts for that marker) and tippman parts...but like RogueFactor stated "Ive been to fields that dont have ANY replacement parts, for any markers//and that isnt limited to the mag." I too have seen this in most fields.

deffinetly!!

if you want it shorter than 14" though you have to email colin