Metal Thing Stuck In XMag Body

[HuD1Ni]

sorry for the lack of technical terms, but I have that metal spacer thing that sorounds the gripframe screw ( rear one ) and it's stuck in the body instead of the frame, it's in there good and wont come out by hand.. does anyone have a good meathod of removing this without harming anything and also a answer as why this might have happend?

[MANN]

Thats your frame bushing (or what I refer to it as) Usually you can grab it with needlenose plyers, and it just slides it out. Unfortunetly I dont have an X mag, and I dont care to scratch the bottom of my rail. Most of the bushings that I have encountered can be wiggled out with your fingers.

[HuD1Ni]

Thats your frame bushing (or what I refer to it as) Usually you can grab it with needlenose plyers, and it just slides it out. Unfortunetly I dont have an X mag, and I dont care to scratch the bottom of my rail. Most of the bushings that I have encountered can be wiggled out with your fingers.

no i've tried plyers and all that and that thing is in there good.. I dont know

[A-Tach-One]

Just leave it, it's fine.

[MANN]

I agree with ^^^. Is there a reason you want it out? Maybe to have it re-annoed. (I think you have the shark attack if im not mistaken. Please dont anno it)

[Shingo]

Any chance you can take a pic of the rest of your Mag? Interested to see what it looks like... the anno job on it looks unique.

~Shingo~

[RRfireblade]

It's pressed in , press it out...pull it out....shout it out.

Or leave it alone , it doesn't matter where it sits but it's probably better stuck in the body anyway.

[Rudz]

pffft

there u go again foolin around with your gun......

[HuD1Ni]

there u go again foolin around with your gun......

yea dude, your pretty cool... if "u" are going to again criticize me, at least make attempt to spell out your words





My valve doesnt come out because of it.. normally yes, I would just leave it.. if it shoots whatever.. but it doesnt shoot period, as some of you might know from previous threads.. so one day I decide as I do alot that i'm going to make another attempt to fix it seeing as I have then again another full tank.. so I go to take the valve apart, and retune the xvalve, as it was chopping.. maybe not set up right.. and the valve doesnt even come out.. I take out the screww and the bolt doesnt come out, it's stuck on that thing.. so I push the valve in further while trying to pull it out, and it doesnt move.. so thats where I am now

and i'd apreciate legit help like the first post, rather then the one I just replied to.. I know mech/classic sear mags well.. seeing as they are butt simple, but not e/xmags..

[Rudz]

hmmm

seems like its a hassle for you, you should sell it

[HuD1Ni]

yea, if somone gives me a good price, I can't say I wouldn't accept.. I love this thing but it just doesn't work well with me..

[Rudz]

hmm

my offer stands

[HuD1Ni]

my offer stands

sorry, I don't remeber, what was it?

[MANN]

Get something to place over your body (so you dont scratch it) a piece of cardboard will probally work (with a hole in it, and somewhat thin. A cerial box piece will work great). Then put your plyers parrell to the rail, and try to twist it a little. Once you compress it a little it should slide right out. Remember going slow is better than messing it up.

If you scratch your rail Ill be willing to purchase your Xmag for say 3-400 ish. As it wont be worth much with a scratch on it

[MANN]

hmm. Your considering selling it? PM me if you do.