AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026.
Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
Theres no reason to use dow33 on a phantom. Plain old airgun oil is best. As a matter of fact, I HATE dow33 or any other grease for paintball gun use. The only real use I would even think about would be spool guns, lightly greasing the tail of the bolt. But I havent owned one yet, it may work better with standard oil.
On a Phantom, the hammer doesnt need much lubing, it doesnt touch the body very much. If you look closely, the hammer is made to be slightly oval shaped. The ends are slightly smaller than the middle. That way the edges dont drag in the body as it travels forwrd or back, reducing friction. 1 or 2 drops of oil smeared over the hammer is all it needs for lubing. The bolt needs no lubing, You can take 1 drop of oil and lube the bolt o-ring if you like, but it isnt necessary. Actually if you lube the bolt you can get oil on the paintball as it loads, and thats bad JuJu. Thats all you need to lube on a Phantom.
Mike C reccomends just putting a few drops of oil on the puncture pin or the ASA and attaching the air source, and then firing a few times with no barrel.
Comment