Boo-Yaa Vs. Hyperframe

[Erick]

booyah

I have a booyah and it is one of the best things i have got for my mag. but there was a problem when i got it the on/off would leak uncontrolable. so i had to get a new on/off but other then that i have had all good luck.

[Automaggin]

Heres the real Boo Yaah Story:

The owner of Boo Yaah has been around, sort of like a "whore", or my sister. He started Diamond Labs in the early 90's, which made some high quality products. He eventually liquidated his inventory and moved on to make another company, which made the Joker series line (more like a joke). Then, he liquidated the Joker inventory. so then he made Toxic Toys, which produced the Tribal line. When tribal v.1 came out, they had some problems. Toxic Toys couldnt keep up with complaints and customer *****ing, so they came out with the Tribal 2.0 to settle all problems and try to clear there bad name. Eventually Toxic Toys went bankrupt, so he sold the rest of his parts to ASP, owned by a guy named Have Blue. then, this same guy, like a cheap whore, moved on. He made Boo-Yaah, which had a partnership with Mako. Mako designed and made the frame, but it was marketed under the Boo-Yaah name. I dont belive someone from Centerflags helped with the design as stated earlier. They reverse engineered the Hyperframe and made the Boo-Yaah frame.

[Blazingace]

I have a Hyper and I have seen a Boo-yah. I actually know where there are 2 on the box. They are alittle beat up but the gripframes are new. I really like my hyper. It is super fast. I mostly just use Semi but I play around with hyper and burst modes. I love the hyper.

[steveg]

I've had a hyperframe for about 2 years now and like it just fine . Had the bolt chew problem but CF sent a longer
on/off pin, that solves the problem.
I looked at a boo-yah after I bought the CF, and was very underwhelmed by the quality, fit, and finish of the thing.
It's so much fun now with the hyper/lvl-10 combo. my squeege stays at home.

P.S. don't believe the anti electro grip stuff it works just fine, and if not CF will make it work.

[chris007]

(HYPERFRAME) HERE'S Y,CUSTOMER SERVICE,QUALITY,UP GRADES,ETC.PROPERLY SET UP A HYPERFRAME WILL NOT EAT A BOLT OR SHEER.SOME TIMES IT IS SOME TRIAL & ERROR INVOLVED,BUT IF YOU DON'T HAVE THE PATIENCE/OR TIME IT IS EASYER TO SEND IT TO CENTERFLAG.IT WILL COME BACK SHOOTING WONDERFULLY IN ABOUT A WEEK.AND IF FOR SOME REASON IT WOULD EAT A SHEER/BOLT CENTERFLAG WILL REPLACE IT FOR FREE.PROPERLY INSTALLED SHOULD ONLY HAVE NORMAL WEAR.TRIGGER PULL ON BOO-YAAH AND HYPERFRAME ARE ABOUT THE SAME STOCK(BUT A TRIGGER JOB CAN BE DONE TO MAKE A HYPER OR BO-YAH HAVE A TRIGGER PULL COMPARABLE TO A ANGLE,MINE IS A MOUSE CLICK,AS SOON AS YOU TOUCH THE TRIGGER IT FIRES,IT'S LESS THAN A M.M.ALSO JUST PUT IN A TRIGGER STOP TO LIMIT EXTRA TRIGGER TRAVEL THAT WAS HARD BUT WORTH IT).MAKEING IT POSSABLE TO HAVE VERY HIGH RATES OF FIRE(IN SEMI).UPGRADE ABILITY IS NOW A OPTION.A STOCK HYPERFRAME HAS SEMI,BERST(3-5),AND HYPER OR AS I LIKE TO CALL IT FULLAUTO ON DEMAND(PULL TRIGGER FASTER THEN 5 BPS.AND IT GOS IN TO FULLAUTO AT A PRESET FIRE RATE,SEMI-13/BURST-10/HYPER-10 BPS.).BUT CENTERFLAG NOW HAS NEW BOARD'S THAT CAN BE INSTALLED. ONE MODE ALL SEMI BOARD,AND WHAT I HAVE THE FULLAUTO BOARD=SEMI,BURST 3-6,AND FULLAUTO ALL MODES MAX. OUT AT 20 BPS.AND AS MANY CASES AS ME AND MY FRIENDS HAVE PUT THROUGH IT ON FULLAUTO AT 20 BPS.IF IT WAS GOING TO EAT MY BOLT/SHEER IT WOULD HAVE SOME TIME AGO(AT THE SHOOTING RANGE).THEY ALSO NOW DO CUSTOM ANNO.ON FRAMES(COST EXTRA).RESEARCH PAST THREADS ON SUBJECT AND ADD UP ALL THE PROS & CONS,AND GET THE E-FRAME YOU WANT. SET UP: P/F (CHROME)MINI BODY WITH X-VALVE,HYPERFRAME(FULLAUTO BOARD AND TRIGGER JOB),HALO B,HYPERFLOW REG(PRE-SET),CHROME DROP WITH ON/OFF.

[speedballbanks]

Originally posted by chris007
(HYPERFRAME) HERE'S Y,CUSTOMER SERVICE,QUALITY,UP GRADES,ETC.PROPERLY SET UP A HYPERFRAME WILL NOT EAT A BOLT OR SHEER.SOME TIMES IT IS SOME TRIAL & ERROR INVOLVED,BUT IF YOU DON'T HAVE THE PATIENCE/OR TIME IT IS EASYER TO SEND IT TO CENTERFLAG.IT WILL COME BACK SHOOTING WONDERFULLY IN ABOUT A WEEK.AND IF FOR SOME REASON IT WOULD EAT A SHEER/BOLT CENTERFLAG WILL REPLACE IT FOR FREE.PROPERLY INSTALLED SHOULD ONLY HAVE NORMAL WEAR.TRIGGER PULL ON BOO-YAAH AND HYPERFRAME ARE ABOUT THE SAME STOCK(BUT A TRIGGER JOB CAN BE DONE TO MAKE A HYPER OR BO-YAH HAVE A TRIGGER PULL COMPARABLE TO A ANGLE,MINE IS A MOUSE CLICK,AS SOON AS YOU TOUCH THE TRIGGER IT FIRES,IT'S LESS THAN A M.M.ALSO JUST PUT IN A TRIGGER STOP TO LIMIT EXTRA TRIGGER TRAVEL THAT WAS HARD BUT WORTH IT).MAKEING IT POSSABLE TO HAVE VERY HIGH RATES OF FIRE(IN SEMI).UPGRADE ABILITY IS NOW A OPTION.A STOCK HYPERFRAME HAS SEMI,BERST(3-5),AND HYPER OR AS I LIKE TO CALL IT FULLAUTO ON DEMAND(PULL TRIGGER FASTER THEN 5 BPS.AND IT GOS IN TO FULLAUTO AT A PRESET FIRE RATE,SEMI-13/BURST-10/HYPER-10 BPS.).BUT CENTERFLAG NOW HAS NEW BOARD'S THAT CAN BE INSTALLED. ONE MODE ALL SEMI BOARD,AND WHAT I HAVE THE FULLAUTO BOARD=SEMI,BURST 3-6,AND FULLAUTO ALL MODES MAX. OUT AT 20 BPS.AND AS MANY CASES AS ME AND MY FRIENDS HAVE PUT THROUGH IT ON FULLAUTO AT 20 BPS.IF IT WAS GOING TO EAT MY BOLT/SHEER IT WOULD HAVE SOME TIME AGO(AT THE SHOOTING RANGE).THEY ALSO NOW DO CUSTOM ANNO.ON FRAMES(COST EXTRA).RESEARCH PAST THREADS ON SUBJECT AND ADD UP ALL THE PROS & CONS,AND GET THE E-FRAME YOU WANT. SET UP: P/F (CHROME)MINI BODY WITH X-VALVE,HYPERFRAME(FULLAUTO BOARD AND TRIGGER JOB),HALO B,HYPERFLOW REG(PRE-SET),CHROME DROP WITH ON/OFF.

first off, lose the caps n00b. second this thread is dead, and over with. let it die. jeeeeez.