Has anyone installed a logic fire blade on there X-MAG and have the gun not fire in manual mode?
-
-
In some cases you have to extend the trigger rod a turn or so.Logic Paintball Forums
My A O Feedback Here
Other Feedback Here
If I've Been Any help
Please Leave Some. :)
-
Some of the original ones had to have a hole/slot drilled in the back to allow the trigger to sit in the proper position to allow full movement for manual operation. I had one of those. It worked fine once I drilled it, positioned it properly and adjusted the trigger rod.Except for the Automag in front, its usually the man behind the equipment that counts.Comment
-
I installed a fireblade on my Emag during this summer and infact it works great in mech mode. Two Saturdays ago when I got to finally go play, I used my Emag in mech mode all day. It was relatively difficult to get the fireblade setup to work in both modes, but it was worth it once completed.
Just an FYI, I had to back out my HES magnet on the trigger quite a bit before it worked properly. Also, make sure you have plenty of air and patience and you will get it working
Comment
Comment