Official AO "Pay It Forward" Thread

[gotboostedvr6]

edited and moved down

[FARMER00]

come on this is a good idea. please follow the rules and try to keep this thread and clean so this wont get closed. but then again we can always have a PAY IT FORWARD PART:II lol

[ShooterJM]

All parts (except trracer parts that I couldn't find) were sent out in padded evelopes bout a week ago. Sorry for the delay, am in the midst of exams and interviews.

[admeech29]

I would like to build a stock class autococker. So if you guys could help in any way please. Thank You.

What I Want
Any cocker parts
Stock Class belts
Stock Class Tubes
Cocker Front Block
Cocker Back Block
Cocker Hosing
Cocker Bolt
Cocker Body

What I can give
2 Cheap pods
2 Pod belt

Thank You

[mobsterboy]

note to everyone: personally, i have been busy around this holiday, and will try to get to my shipments as soon as reasonably possible, but ive found little time between thanksgiving, and fall exams, so pardon the delays

[txaggie08]

What i need

the rail for an old style maxflo

What ive got....well, ive got lots of spare spyder parts, might even have some braided hose and junk laying around...

[superhiquality87]

Well here we go...

I've linked to a couple pictures for reference

Available
1 "Widemouth Sight Feeder" ~250 rd. hopper Gone to matteusz.
3 black *brand new* Nitroduck 150 rd. pods 1 gone to matteusz, 2 gone to etjoyride.
1 *wide* double finger trigger shoe (fits Tippman?) (missing 2 of 3 set screws) Gone to Shockwave on MCB.
1 plastic PGP pump Gone to Pillage on MCB.
1 "Lonestar Ordinance Stowaway2" grip W/O trap door
1 really beat up VM68 hand guard Gone to Shockwave on MCB.
1 VM68 rear main screw that goes through upper and lower plugs
? I've got a bunch of tank o-rings if anyone needs a couple extra with other stuff
1 (7 1/4) length of black plastic tubing (o.d.- .25 of an inch) Gone to tech-chan.
2 Sheridan grip panel screws (new-same on vm68.com)
1 Autococker trigger coupler thingy minus set screws (one end threaded)
1 ghetto copper VM68 feedneck (a little longer than original and mostly painted black)

Needs
- any Autococker shroud
- Autococker safety button (to fit 92-95ish frame)
- Dovetail mounts (2) (for 1" o.d. scope)
- any random 1/8th NPT braided hoses and fittings
- 45* grips for my phantom!

As always;
III

[wanna-b-ballin']

have
intellifeed wire. just attach into grip and your good to go. reserved to matteusz
maybe some other stuff

want
red or black shoulder stock for my phantom
fs7 upgrades
pocket hoppers
macro fittings. straight fitting to be exact.

given
x-valve on/off and minimag body to wjr

recieved
nothing yet

[VFX_Fenix]

Alrighty, I think I'll play along with some stuff here. Let's see...

What I've Got
PTP - Warp Feed Adapter - ICD/Defiant/Timmy Threads
Nitrile O-Rings for Warp Feed Hose x2
KC - Trouble Free Airgun Lube - CO2 & N2 formulas x3 ea. (superhiquality87 CO2 Formula x3 LinearGoose N2 Fomula x1 Shockwave. N2 Formula x1)


What I've Given
PTP - Warp Feed Adapter - Angel Threads (Drizit)
CP - Sticker Sheet x2 (superhiquality87 x1,68_Classic)
PTP - Warp Feed Adapter - Universal (stuff it in your stock feed neck and run the elbow to it) (Shockwave.)
AGD - Warp Feed Mounting Plate (grEnAlEins)
AGD - Intelifame (sans grip pannels) Gloss Black w/ blade trigger in nearly new condition also include a copper rail bushing (Ratt)
AGD - Warp Feed plastic 90* fitting (Shockwave.)
Short length of Warp Hose (I don't think it'll be usfull for anything but you never know) (Shockwave.)
AGD - Warp Feed Hose Connector 1 pair (connects the ends of the hose to Warp Body and 90* fitting) (Shockwave.)
AGD - CF High Rise Twist Lock Polished SS Body (matteusz)
AGD - Twistlock RT Barrel (CF) (matteusz)
AGD - Twistlock Barrel O-Rings x4 (I believe) (matteusz)
AGD - Level 7 Bolt Spring - New and unused (Shockwave.)


What I'd Like
Pump/Sniper Kit for pre-2K Cocker
E-Mag Battery Housing
AGD Lions Stickers
68ci Tank cover
90* fittings x3
RT Bolt Bumpers
I'm sure there's more....

What I've recieved
AGD - Classic Valve Bumper Drizit
Q/D fittings x3 matteuz
AGD Lions Stickers matteuz


EDIT _ I appreciate the patience of the folks who have stuff being sent to them by me, it all went out in the mail today unless I sent you a PM. Things have been busy at best and slammed at worst for the last month.

[Wicked_Silence]

What I have:

1 45* elbow (purple)
3 right handed gloves (no idea where the left ones went) 2 JT (no fingers) and 1 dye (first 2 fingers cut off)
2 red dot sights (dunno if they work or not as they need batteries) 1 Adco and the other Brass Eagle (They were spoken for but haven't heard back from the interested party)



What I need:

Autococker beavertail w/screw (Would like a black one, maybe an evil one)
Set Screws to mount an asa to a dovetail
Trigger screws to mount a trigger frame to an autococker
Rear cocking Spyder Bolt
Reg for a 3000 PSI tank (Loaner tank with messed up threads on my crossfire)
Old grips for a King Cobra pump
Body for King Cobra
lvl 10 springs


What I've received:

Nothing yet



What I've given:

Zap 2 pod pouch with 2 100 round pods 68_Classic
1 no-name neoprene neck guard 68_Classic
1 bendy squeegee (the white ones that usually get tossed into the crowd at events) 68_Classic
1 straightshot squeegee (about a 1 1/2 long) (no longer available, gave it to a friend
1 crossman 'A' stock (top bar cut so you can fit an air tank on the back of the marker)(also 1 side of the grip is broken but have the piece) Shockwave



P.S. - Great idea guys

[Drizit]

What I have

140 Round Pods (got a bunch of em) (spike_ball999)
remote on/off asa that doesn't turn off any more superhiquality87
old school VL wrap around M16 Grips superhiquality87
Unused Red Demonic strangler feed neck for Impuls (with extender to make it high rise)
stock Tippmann 98 feed neck (wanna-b-ballin')
3 short paribolic power feed plugs (2 gone to 68_Classic)
a couple of Classic valve reg pistons (no orings)
stock Impulse trigger
Tippmann 98 double trigger (won't fit custom 98)
Stock Impulse hammer
Mag Fomies (for fomie or LVL10 bolts) (some gone to 68_Classic, more are going to AutoMagClassic1)
mag bolt springs (stock) (sending one to AutoMagClassic1 still have a couple more)
Spyder Boyah frame (needs battery clip, may or may not work after that, NO grips) gotboostedvr6
Aluminium 45 frame (basicaly setup for a mag but the top is too thin and it won't fit a mag) (68_Classic)
Revy shells (can't find them at the moment to say what sides or colours they are, just know I have em) (wanna-b-ballin')
2 pod across harnes (i think it's BE, only holds 100rd pods well)
2 pod 32* harnes cammo (AutoMagClassic1)
More to come as I trip over it.

What I need

RT Sear
RT On/Off pin (realy realy realy need this one, my longbow is autoresponse now)
Xvalve/ Retro valve reg Seat
RT Pro body Rail
Longbow Mags
Pump Mag parts
any mag body rail and/or body even a classic RT body works I've done the mod before (got an itch to use that classic valve I have sitting around)
T or L stock (gas through or not)
Phantom vert feed body



What I've receved

PTP Angel treaded warp adapter - VFX_Fenix

What I've sent

Blue bolt bumper - VFX_Fenix

BTW I'm from Canada to.

To everyone I'm suposed to be sending stuff to, I'm sorry I havn't had time to deal with it. There's just been too much going on, now I have to pull my appartment apart so it can be painted while I'm away next week. When I get back the first week will probably be spent putting it back together again. I'll try and get things out some time around 01/14. sorry about the delay.

[gotboostedvr6]

edited because i shouldn't be so quick to respond rudely

[gotboostedvr6]

same here

[spike_ball999]

It also does NOT say that he is REQUIRED to give it to you. He's giving it away, it's his choice.

/no more of this

[gotboostedvr6]

i like the concept , id really like to drop it now. lets start to see some Christmas spirit

if shipment can be done using book rate ($1.25) ill take care of it if not you pay difference sounds fair.

If anyone wants to learn how to get shipping for $1.25 (in the 48) please pm me and ill fill you in!!!

I HAVE:
An ASA (gone)
Some stock mag grips
Leaky Pure energy hpa reg 3k psi needs new disk puts out 1400-1900 psi V see below:
(only sending it if have proof you've bought the rebuild kit as i'm not gonna be held responsible when you blow up).
Well used BE barrel plug (dog ate part of it)
Some screws
Screwdriver or 2 and some miss tools. (lmk what you need tool wise and ill see if i can help you)

NEED:
Cocker barrel
Tank o-rings
Old crappy mag body any will work
Curved mag power feed plug not spyder i have spyder to trade if you would like
Field strip screw rear one for mags
CO2 reg (no leaks please)