ok, with my brother and a close friend both owning a classic 68 mag and me owning a Phantom, I finally caved in and decided to buy a semi, but a none electro semi. After doing a ton of research, and finding this site, I've decided to get a mag. So I finally got my hands on my very own mag at the end of the summer. I had no idea as to how to host pictures until I read one of the other threads here today. WOOT!
After a month and a bit, I've contracted the "must upgrade my mag" syndrom as you can see from the pic. This gun originally started as a stock Tac-One WL w/Qloader. Since then I've added...
ULE body
ULT
New gas thru (I really didn't like the bicycle grips)
New barrel (ofcourse)
New grips to match (yes, those are Ion grips)
Old school Max-Flo
Downstream bleed (I don't know how to get rid of excess air from the max flo)
a CAA sticker of BPS +2
This thing can "bounce" on average 20bps over the chrony.
However, I have no idea as to how to make it bounce faster. I've tried using the original RT on/off, keeping it as the ULT with as many shims as I can fit in. The input pressure is between 1000 and 1100 according to the gauge on the Max Flo.
If anyone has any ideas, please do let me know.
After a month and a bit, I've contracted the "must upgrade my mag" syndrom as you can see from the pic. This gun originally started as a stock Tac-One WL w/Qloader. Since then I've added...
ULE body
ULT
New gas thru (I really didn't like the bicycle grips)
New barrel (ofcourse)
New grips to match (yes, those are Ion grips)
Old school Max-Flo
Downstream bleed (I don't know how to get rid of excess air from the max flo)
a CAA sticker of BPS +2
This thing can "bounce" on average 20bps over the chrony.
However, I have no idea as to how to make it bounce faster. I've tried using the original RT on/off, keeping it as the ULT with as many shims as I can fit in. The input pressure is between 1000 and 1100 according to the gauge on the Max Flo.
If anyone has any ideas, please do let me know.
Comment