N2 Tank Regulators.

[FA22RaptorF22]

You guys have all seen zakvetter doing rapidfire off of an N2 tank....

link to stuff: http://zakvetter.com/pages/paintball.../goodregs.html

What tank / reg combo is the best. i dont care about $$, just what is the best. From seeing vids and such i would say the dynaflow is the best....what do you guys say?

Basically im trying to find the tank / reg with the fastest recharge rate....whats the best they make?

[MoeMag]

As far as recharge rate...
The new CP regs by far then after that crossfire.

Shameless plug...
I have a maxflow reg lile the one that zak vetter uses in the bst airsystems.

[FA22RaptorF22]

where can i get one of those max flo's that are high pressure? I just want the absolute fastest thing ever.

[neppo1345]

Well, your best bet would be a micro max-flo.

They can be had from just about any reputable paintball dealer.

Run 90-100 for the reg alone.

You won't be let down.

[txaggie08]

except the micro isnt adjustable..

[RoLLonBombs]

comprable to flatline? or does it just blow the flatline out fothe water, and how fast would i have to be firing to ntice the diff, kinda off topic but jsut wondering since i just bought a flatline

[buzzboy]

Remember that you would need the older style Maxflow that was like a bottom line adapter. Also the reason that he uses the maxflow over the flatline is that the maxflow is the one that achieves the highest pressure. Something like 1200 IIRC.

[FSU_Paintball]

You guys have all seen zakvetter doing rapidfire off of an N2 tank....

link to stuff: http://zakvetter.com/pages/paintball.../goodregs.html

What tank / reg combo is the best. i dont care about $$, just what is the best. From seeing vids and such i would say the dynaflow is the best....what do you guys say?

Basically im trying to find the tank / reg with the fastest recharge rate....whats the best they make?

Are you using a mag?

If not, it doesn't matter. Anything with a decent recharge/flow rate will be just as good as any other tank. Might as well save some cash and get something under $200.

As for a reg.... Sidewinder, 2-Liter, Evolve, CP, Hyper 2 are all good. Sidewinder is my personal preference.

[txaggie08]

he wants an adjustable tank dude not an inline reg... thats what were talking about

[FA22RaptorF22]

yes an adjustable tank. Im useing an emag. mags can cycle to 34.5 bps...rapid fire.

I need a beast of a tank. And how many psi can an emag valve handle?

[Piranti]

All automag valves are rated for 3000psi unregulated input..........says so right on the valve

[jenarelJAM]

Raptor you remind me very much of myself, three years ago.
I wanted an emag, and once I got it, I wanted the tank that would let me rapidfire. I won't relate the whole long process of bad tanks, etc, but I ended up with a 4500 flatline.
For the record, the flatline can output 1200 psi. Or just under. It starts venting for safety right around 1200. Flatline on my emag makes rapid-firing a snap. Keep an alan wrench in my pocket and before a game, A decrease in "velocity" and an increase in input pressure switches backup mech mode into primary rapid-fire mode.

However, imo it's not needed on an emag. Sure it's fun. Sure you want to get the absolute most out of your emag, but in my opinion, it's better to just get a screw-in preset by a reputable company. I love my flatline, it's incredibly easy to work with, and it's convenient, because now I have a viking too(low pressure), but there are other, cheaper ways. 800 psi is plenty for e mode, and rapid-firing without a giant scuba tank isn't really that much faster.

It's only your money.

[FA22RaptorF22]

thanks for the help. one question though. zakvetter had four regs on the page i posted and pretty much said that the maxflo was faster? is that true or is the flatline better in your opinion?

[FA22RaptorF22]

i think this is perfect...right?

http://cgi.ebay.com/Smart-Parts-Max-...ayphotohosting

[FA22RaptorF22]

ups?