AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026.
Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
Just remember Don, we are talking about a pump gun. No need for the highest reg recharge rate since you're not going to be able to pump all that fast anyway. The Stab will more than meet your needs. The one on my Blazer keeps up just fine and i shoot that way faster than you'll be pumping.
^^ yes but the faster it recharges the faster it could push air into the resevoir so you might even be able to (depending how long the vavle stays open) get more air flow so the psi could be lower (i like LP )
with mine i can shoot my sniper 2 on co2 down to almost no psi in the tank (literaly less than 10 shots that are lower fps the about a 2 second pshh of the tank clearing draining totaly)
it's not going to make any noticeable difference to him. He's not shooting over 10bps so the recharge rate will not matter. The electro Blazers do 15 without any shootdown and they are more demanding on air than he will ever be.
a slightly uglier (yet practical) solution IMHO, the "sideline" stabilizer:
mabe that's what your looking for?
Seems similar to what I have on my mag classic... I bought mine used and the owner had the Smart Parts Magic box installed on it. I remember when it first came out (something about low and high volume pops) but really have no idea what it does. I'm guessing kinda like an expansion chamber?
Seems similar to what I have on my mag classic... I bought mine used and the owner had the Smart Parts Magic box installed on it. I remember when it first came out (something about low and high volume pops) but really have no idea what it does. I'm guessing kinda like an expansion chamber?
It was suppossed to assist in making it operate at a lower pressure, IIRC.
Didn't do anything at all.
it's simply s high pressure stabilizer that regulates co2 more consistantly than the classic valve alone.
BTW check this out:
Ultra Low pressure setup for dispensing beer. Smallest compact beer system available from PPS. Can consistently regulate down to 2 psi. Dual fail safe system. Co2 tank included with the kit. PSI adjustable from 0-80 psi. 5 psi for dispensing and 30 psi for re-carbonation.
this is sweet, PPS makes great regulators and keeps the party going.
Comment