A true gun whore..

[BigEvil]

IS NOT limited to mag alone....

Some non-mag goodness



The 'new' Tarantula milled Viking. Yeah I know, I know loose the feedneck and red asa.



My favoritest gun of all time. WGP Sniper II circa 1995. Dead-on-balls accurate.


Cus its just wrong not to own a mech cocker and consider yourself a tinkerer

[deathstalker]

Yeah I know, I know loose the feedneck and red asa.

Keep the feedneck, lose the ASA. It's a LAPCO, no?

Oh yeah, nice markers!

[GT]

I like the sniper. I here the eclipse hinge is butta' on a cocker.

[rkjunior303]

get a 2liter with no extension on that FSP and it will clean up the front!

[don miguel]

love the angel w/ dm5 frame.

[BigEvil]

get a 2liter with no extension on that FSP and it will clean up the front!

Thinking about that... it is very comfy the way it is, but it looks big.

[BigEvil]

love the angel w/ dm5 frame.

Without a doubt the FASTEST & NASTIEST marker I have ever shot, owned, or seen. The DM5 Predator board and eyes are god sends. I regularly get chased off of the field with it cus its soooo easy to get carried away. The only downside on this marker is the trigger, which sucks. The gun is also going to Gruntbull for a black/silver acid wash once I figure out how to get the breech hindge rods out.

[warbeak2099]

I am sadness I can't see pics.

[flyingpootang]

Without a doubt the FASTEST & NASTIEST marker I have ever shot, owned, or seen. The DM5 Predator board and eyes are god sends. I regularly get chased off of the field with it cus its soooo easy to get carried away. The only downside on this marker is the trigger, which sucks. The gun is also going to Gruntbull for a black/silver acid wash once I figure out how to get the breech hindge rods out.

Their metric grub screws held in by loctite. After you remove them you have to make shure its clean of paint and old locktite. By moving the breach in a back/forth motion to unseat the breach pins. Use a plastic/nonmatalic wedge to push the pin out inbetween the breach and body.

[Pneumagger]

Without a doubt the FASTEST & NASTIEST marker I have ever shot, owned, or seen. ...

Clearly you haven't played with the viking yet.

[BigEvil]

Clearly you haven't played with the viking yet.

Same thing, only different :-)

[mobsterboy]

k, undo the grub screws on either side of the breech pins
the pins are threaded, so if you have the tool kit one of the tools should work
if your ghetto like me
your solenoid mounting screw should be the same thread. DO NOT MISTHREAD THEM, BIG TIME FUBARED IF YOU DO, AKA YOU WONT HAVE A SOLENOID MOUNTING SCREW. Once threaded, just use needle nose pliers and pull either side out.

Locktite? No. Not locktited. Hope this helps Bigevil. Had the same thing with mine, just went to MarkM and he walked me through it

[BigEvil]

k, undo the grub screws on either side of the breech pins
the pins are threaded, so if you have the tool kit one of the tools should work
if your ghetto like me
your solenoid mounting screw should be the same thread. DO NOT MISTHREAD THEM, BIG TIME FUBARED IF YOU DO, AKA YOU WONT HAVE A SOLENOID MOUNTING SCREW. Once threaded, just use needle nose pliers and pull either side out.

Locktite? No. Not locktited. Hope this helps Bigevil. Had the same thing with mine, just went to MarkM and he walked me through it

OK great. Thanks. I have the Angel tool kit, but I dont think there is anything in there that would work, either im missing something or im not sure what one you are reffering too.

[atm743]

i love that viking.

looks like like the sr-1 jmj did.

the feedneck you don't need to loose. i have the same kind on my merlin and i LOVE IT.

but you do need to loose the asa


EDIT

also loose the trigger

get a nurvouse jmj trigger

[rkjunior303]

Sam Rhodes did the SR-1, hence the name "SR"