Need some ideas...CFOA legal ramping mag

[punkncat]

Awright....as some of you may have seen I will be playing CFOA next year. Given the position we are in, I am open to use any equipment I like. I am thinking of going with a mag.

I am currently awaiting some parts for what will become a project in the works. I will be using an Xvalved ULE with a....well here is where I want some suggestions.

I am getting a 13BPS Hyperframe. I want it to have all the features and speed of a new marker. I was thinking of going with the Tboard and having the frame milled for the Dye membrane pad for on/off, etc. Someone mentioned that the Tboard won't fit inside the Hyperframe, and to look into Cyborg boards...among others.

I know nothing about modding a Hyper, have never owned one. Generally when I have upgraded a board it was a drop in, and required no rewiring or modding to make it work. I am an electrician so with the proper schematics I can make it work, but want to go the easiest route possible and most reliable.

Weight is of the utmost importance.
I want to preserve the "mech" look. I would even go mech if RT was legal, but alas I cannot.
What have others done to make their Mag into a ramping beast?

Doesn't have to be a modded Hyperframe, but have no intrest in Emag lowers. And don't want to spend a fortune or wait forever.....

[Dubstar112]

Somone has successfully placed an ION board into a pneumag conversion. In the work shop, check it out. The hyperframe might lend its self to the electro pneumatic conversion nicley.

Otherwise, my hyperframe had a Hyper mode on it capped at 13. But you also should consider a lighter switch. I believe they came with 200g switches, and down to 50g is available at appropriate electronics supply stores from what I understand. Airsolder mighthave them, I havent checked myself.

edit. 25 g switch. whatever the hyper came with, I know its heavy...

http://www.airsoldier.com:8080/cgi-bin/mivavm?Merchant2/merchant.mvc+Screen=PROD&Store_Code=AOS&Product_Code=OMRON-D2F-FL

http://www.automags.org/forums/showthread.php?t=189803

[punkncat]

Somone has successfully placed an ION board into a pneumag conversion. In the work shop, check it out. The hyperframe might lend its self to the electro pneumatic conversion nicley.

Otherwise, my hyperframe had a Hyper mode on it capped at 13. But you also should consider a lighter switch. I believe they came with 200g switches, and down to 50g is available at appropriate electronics supply stores from what I understand. Airsolder mighthave them, I havent checked myself.

edit. 25 g switch. whatever the hyper came with, I know its heavy...

http://www.airsoldier.com:8080/cgi-bin/mivavm?Merchant2/merchant.mvc+Screen=PROD&Store_Code=AOS&Product_Code=OMRON-D2F-FL

http://www.automags.org/forums/showthread.php?t=189803

So looking through the Ion board thread, I see that everyone is concentrating on electro pneumatic. What if you were to remove the 2way and use the pulse coming off the capacitor to work the noid in the Hyperframe?
Only problem I can forsee with the limited research I have done so far is what I saw on Ydna's site:

Most Ion boards operate the solenoid by sending a surge of full power for a few milliseconds, afterwards the signal is pulsed on and off at a very fast rate. What this does is keep the armature in the firing position while using the lowest amount of battery power possible. This serves to both lengthen battery life, and keep heat buildup to a minimum.

..and wonder if this would cause a problem with the solenoid opening or resetting properly.

I have already noted that with minor modification the microswitch can be removed and remotely located.

[rkjunior303]

why not get emag lowers with that new software that kid wrote?

honestly, do yourself a favor - sell the mag and buy a cyborg.

[BigEvil]

why not get emag lowers with that new software that kid wrote?

honestly, do yourself a favor - sell the mag and buy a cyborg.

If he's going through that much trouble.. then he's obviously attached to the mag.

[p8ntbal4me]

Awright....as some of you may have seen I will be playing CFOA next year. Given the position we are in, I am open to use any equipment I like. I am thinking of going with a mag.

I am currently awaiting some parts for what will become a project in the works. I will be using an Xvalved ULE with a....well here is where I want some suggestions.

I am getting a 13BPS Hyperframe. I want it to have all the features and speed of a new marker. I was thinking of going with the Tboard and having the frame milled for the Dye membrane pad for on/off, etc. Someone mentioned that the Tboard won't fit inside the Hyperframe, and to look into Cyborg boards...among others.

I know nothing about modding a Hyper, have never owned one. Generally when I have upgraded a board it was a drop in, and required no rewiring or modding to make it work. I am an electrician so with the proper schematics I can make it work, but want to go the easiest route possible and most reliable.

Weight is of the utmost importance.
I want to preserve the "mech" look. I would even go mech if RT was legal, but alas I cannot.
What have others done to make their Mag into a ramping beast?

Doesn't have to be a modded Hyperframe, but have no intrest in Emag lowers. And don't want to spend a fortune or wait forever.....

I have 2 Hyperframes, both are the 13Bps boards you are describing. The only thing you need to change out is the board. You need a board that has supports: a trigger switch, a solenoid, a battery, and can fit inside your space for the frame.

The board in the Hyperframe measures 2 inches in length and 3/4 of an inch in width(give or take a quarter inch).
Ive looked into the T-board and I have never shot one,.. but I can tell you that for my project frame, I am going a different direction with the board.

I have measured out the Rampage Board from GoAPEonline.com. There board fits in the space provided in the Hyperframe. I dont know about the screw holes though. Their noid is hard wired to the board and it looks shorter,... so you would have to cut the wires, make them longer, and solder them back together. Some boards come with triggers on them, some come with them as an add on. You need to see what you need.

Its not hard what you are doing,.. almost any board will work. Jusy make sure you start small and work your way out,.... thats what killed me with my design flaws. The DYE membrane would be nice,.. but do you really need a board that supports it?

Ive got a Xonik (eBlade) cocker board in a Z-Grip Im working on and it took alot of milling to get it in there. I wish I stayed smaller,.. but now that the solenoid is mounted and semi is ripping like crazy,.. Im glad I took the time to fix my errors early.

Leave your solenoid mounted in there, disco your hyperframe board and save it for later.
Fit your new board in,... match up the wires and try it out. Make SURE you buy a wiring harness for the board you are buying!!!! So you can wire everything up right away.

You can see what BigEvil had to do to get his NME board inside the Intelliframe. That about as much work as you will have to do,.. grind a bit of metal if u get a board thats 2 big.

I used to play in the CFOA circuit when I was in the service,... the A-Team, Black N Blue, Carolina Ruckus, etc,... any of those teams still make the roster?? Are you in the Jacksonville NC area or where?

[punkncat]

why not get emag lowers with that new software that kid wrote?

honestly, do yourself a favor - sell the mag and buy a cyborg.

I am looking away from the Emag lowers due to weight, as I mentioned above.

Thanks for the suggestion......

[p8ntbal4me]

I forgot to mention one other thing that is VERY IMPORTANT about using a mag in the CFOA.

You need to MAKE SURE that prior (like a 2 week period prior) you get your coach or designated captain to tell the CFOA that you are specifically requesting a defined chrono procedure in the event that a team member is using a XYZ mag and that the proper chrono method for the gun is XYZ way.

Guys that ran classic R/Ts (like me) in the CFOA when it was first starting up hd issues with chrono judges because they were not chronoing the guns right before the game and after the game,.... not to mention during the game!

My point is laid out in the E-Mag/Micro E-Mag manual,.... simply selecting the gun between manual and electronic,... changes the way you have to chrono the gun.

Why do this? If your seriously planning on completing,... then by doing this BEFORE the 3 day prior to even gun inspection clause occurs, you have provided the tourney series with the ability to contact the team coordinator in ample time to ask you specifics on the gun to educate a judge PRIOR to the event.

If the gun runs okay over the chrono before the game,.. then spikes on the field and you are deducted points, you can challenge the call on the basis that the chrono judge does not know the proper way to chrono the gun.

I know your running a electronic frame and all,.... and maybe your just playing to play. But if your going to compete and pay $1000 per event to try and win the grand prize,... you may want to look into this.

Just a thought,...

[punkncat]

...

Thanks for the info, esp the measurements.

I have a few stock Ion boards I can work with to see if I can power the pancake noid with them.....looking into some of the posts about the pneumatic mod I am unsure if I am skilled enough to safely solder my connections w/o burning the board.

I am also going to look further into the APE board, and still strongly considering the Tboard. It just seems like it will be easiest.



EDIT- Also, as far as I understand the chrono issue follows the RT on/off, is this not correct? I will be using the on/off that came with the Hyperframe or a ULT.

[p8ntbal4me]

Thanks for the info, esp the measurements.

I have a few stock Ion boards I can work with to see if I can power the pancake noid with them.....looking into some of the posts about the pneumatic mod I am unsure if I am skilled enough to safely solder my connections w/o burning the board.

I am also going to look further into the APE board, and still strongly considering the Tboard. It just seems like it will be easiest.

Pneumagger did his EPMag with a ION board but he cut everything off of it except the board (search his posts out and ull see it).

From what he says you cnt use it at it lies,.. u need to strip it down.

Seriously,.. you can do the elctronic mod just by swaping the boards out,.. u already hae the frame.

The Pneumag takes more parts and more time. And you might not get more speed out of it to boot.

If you are playing tourney,... ur going to want that extra 15Bps with only struming the trigger at 8bps. It makes the differance in the 3-5 man were the shooting lanes are closer.

[punkncat]

Pneumagger did his EPMag with a ION board but he cut everything off of it except the board (search his posts out and ull see it).

Seriously,.. you can do the elctronic mod just by swaping the boards out,.. u already hae the frame.

What I am considering is only an electronic mod, a board swap. The only reason I am considering using an Ion board is that its small, fast, and I can get one or two for free. The only thing that I will have to do is rig up the wiring...I hope.

[p8ntbal4me]

What I am considering is only an electronic mod, a board swap. The only reason I am considering using an Ion board is that its small, fast, and I can get one or two for free. The only thing that I will have to do is rig up the wiring...I hope.

Heres the mod to the ION board that Pneumagger did,... he says its as small as a morlock,... and thats pretty damn small!

ION MAG Board

it looks funny cause he wrapped it up in HS tube to prevent it from shorting out on the frame.

[punkncat]

Heres the mod to the ION board that Pneumagger did,... he says its as small as a morlock,... and thats pretty damn small!

ION MAG Board

it looks funny cause he wrapped it up in HS tube to prevent it from shorting out on the frame.

What he did is exactly what I have in mind w/o removing the capacitor.

[turbo chicken]

Send a spyder frame to luke then put a tboard in it ... get whatever ramping chip they make and your done

[Dubstar112]

So looking through the Ion board thread, I see that everyone is concentrating on electro pneumatic. What if you were to remove the 2way and use the pulse coming off the capacitor to work the noid in the Hyperframe?
Only problem I can forsee with the limited research I have done so far is what I saw on Ydna's site:


..and wonder if this would cause a problem with the solenoid opening or resetting properly.

I have already noted that with minor modification the microswitch can be removed and remotely located.

If youre aiming for something reliable at the moment, Id stick to the method that they have used. Its just an electro pneumag. However the Ion pulse can be chagned to a very wide range, but like you said the style of pulse it uses may not work with a large pancake or emag style noid.. That would give you 17 bps and a lot of ramping options especially with all the aftermarket board solutions available.