rail

[CONFIRMEDKILL]

http://cgi.ebay.com/Airgun-Automag-M...QQcmdZViewItem



Will that get a red dot over the right side power feed on my Minimag? And while I am at it, will a warp feed work ok on the stock Minimag body?

[MANN]

depends on the red dot sight. I have seen some with "raisers"

Yes a warp will work on a minimag body

[behemoth]

http://cgi.ebay.com/Airgun-Automag-M...QQcmdZViewItem



Will that get a red dot over the right side power feed on my Minimag? And while I am at it, will a warp feed work ok on the stock Minimag body?

Probably not, but depends on the sight.

ANd yes, warp will work on the minmag body, however its best if you A) cut the feedneck down and put the plug in the top.

OR

Get a "Long" PF plug to work with the warpfeed.

[grEnAlEins]

Dude, you might want a riser to get over the PF...
and the warp will work, but I highly recommend using the long PF plug. You can get it from AGD.

[doc_Zox]

heres that sight rail on 2 of my markers;
chopped right direct feed:


warp right:

[Jaan]

You can get different height scope rings...often, "peek-a-boo" sight rings will work. Those are sight rings for rifles that are elevated with a hole under the scope so you can use the rifles iron sights at close range as well.

Some people also like "occluded" red dot sights. Those are red dots you can't see through. People will deliberately cover the objective lens with something black. Some people have an easier time seeing the red dot cover the target that way while keeping both eyes open.

[paint magnet]

heres that sight rail on 2 of my markers;
chopped right direct feed:


warp right:

That would make an awesome pump mag!

[buzzboy]

If you have a PF Right body then you will have the most warp luck if you shoot righty. And yeah, it's nice to have the long and short PF plug so you can switch between hopper on top and warp easily.

[Circle]

Doc zox has some of the nicest mags I've ever seen. Makes me jealous.