I think I'm finally done...maybe

[DSR75]

Well,

After deciding and undeciding and redeciding I think I'm finally done modding my mag. Maybe I might change the frame if I can find a UMF or decide to buy one of Jay's. I also have looked at getting some wood grips to match the foregrip but I can't find any that fit the grip styx frame and since I haven't decided completely on that frame I'm holding off. I've borrowed some ideas from others, well stole is probably a better word. I would like to have an honest opinion on it.

Warp Left tac one body
Rt Rail
Grip Styx frame (I prefer a single trigger, I'm more used to them)
Custom made foregrip (thanks Don aka urbanSix)
14in Stiffi
Custom made machine gun shroud
Micro CA-II (I used to run HPA, PB store closed so I can't get HPA anymore)
Red/Green dot w/ 5 brightness settings for each
PPS Sideline Stab

I use both a custom 15 round feed and a warp feed. It depends on what the day calls for. I play in the woods only so keep that in mind.

[mr.mag218]

i like it alot. scenario wise....very very great gun. i can barely tell its a paintball gun. well done

[jenarelJAM]

wait, so are you running that off of 12g's? Looks nice.

[warbeak2099]

He can't be. Judging from the stainless backend of the valve, it's an X-valve. He must just be using the stock as a stock.

Nice gun btw. Scary lookin. What loader are you using, Qloader or Warp?

[Head knight of Ni]

He can't be. Judging from the stainless backend of the valve, it's an X-valve. He must just be using the stock as a stock.

Nice gun btw. Scary lookin. What loader are you using, Qloader or Warp?

He's got a Palmer's Stab. on it, which is common for CO2 use.

[warbeak2099]

He's got a Palmer's Stab. on it, which is common for CO2 use.

That's true. But the back end of the valve sticking out looks like an x-valve. Makes me wonder if he's not just double regging an X.

[txaggie08]

DOnt know, might be using 12g's with the X and using the stab to solve any issues?

[zipity_Bop]

Automags are a sickness.... you are NEVER done.......
good for us though

[d4m4don3]

You are the first to mount your stock to the back accessory slot. Good job!

Ive been wondering when someone would do that.

1st in a while?

Wasn't that common back in the day? The classic rails had that accessory slot.

http://www.automags.org/forums/showpost.php?p=2282916&postcount=11

[warbeak2099]

DOnt know, might be using 12g's with the X and using the stab to solve any issues?

I'm not sure the stab would really solve the problem.

[kruger]

Very nice. And, I might be able to help you out with the wood grip thing

[warbeak2099]

1st in a while?

Wasn't that common back in the day? The classic rails had that accessory slot.


http://www.automags.org/forums/showp...6&postcount=11

He means on his rails.

[d4m4don3]

He means on his rails.

OIC I stand corrected

[DSR75]

I'm using a classic valve. I no longer have access to HPA. I've always used a classic valve so it wasn't that big a deal.

Kruger, I'll have to get with you on the grips. I'm waiting to decide if I want to buy a new frame first.

I use both a warp and a custom made 15 round loader.

Thanks for the complements.

[gus13]

you should post up a pic with the 15 round feed and another w/ the warp, It looks sweet as is, but I'd like to see the custom loader! good job all in all, nice work.