Trigo Time!

[Fig]

Gunslinger7 and I are making this beautiful Viewloader Triad into an Ego-ish Marker. Here's the back milled by us so far. Feedneck is comming off next, then paint. I will update during the process.








Don't mind the feedneck.

New Update!

Feedneck Removed!

[warbeak2099]

Make it into an E-pneu and you will not only have an Ego-sih looking marker, you'll have an Ego!

Pretty easy with the stuff that Scenario dreams is putting out:

http://www.scenariodreams.com/oscommerce/index.php?cPath=18&osCsid=240d30bbc9122582b300259491d484c2

You'd need:

Primal or Dragun The One Board
EP Solenoid
EP Ram
EP Frontblock/lpr
probly the EP Gripframe

Cheap-ish spimmy conversion.

Nice milling job btw, very smooth.

[gunslinger7]

Feedneck comes off this week, then off to gruntbull for annodizing.

[iambored]

someone did that to a spyder once. It's somewhere on pbreview. It looked alot like an ego, very nice.

[jenarelJAM]

Wow... Serious props to you... I want to see it when it's done. Yes?

[Pneumagger]

Have an MPA-3 actuate the sear using a small solenoid valve and board to control dwell.
That would mow for sure.

[warbeak2099]

Have an MPA-3 actuate the sear using a small solenoid valve and board to control dwell.
That would mow for sure.

Just slapping on the Scenario Dreams ram and lpr frontblock would be way easier. It's like $30 for both. Then about $65 for a E-Pneu T-board. Then $15 for the E-pneu solenoid. $110 total . Should come out to be the same with a MPA-3, they're like $30 right?

[Pneumagger]

Just slapping on the Scenario Dreams ram and lpr frontblock would be way easier. It's like $30 for both. Then about $65 for a E-Pneu T-board. Then $15 for the E-pneu solenoid. $110 total . Should come out to be the same with a MPA-3, they're like $30 right?

I have a triad, and I'm not sure you can use that part on it. I know the triad even has a funny thing to the frame as to where you cannot swap it with a spyder frame.

[warbeak2099]

I have a triad, and I'm not sure you can use that part on it. I know the triad even has a funny thing to the frame as to where you cannot swap it with a spyder frame.

o that sucks

[gunslinger7]

I have a triad, and I'm not sure you can use that part on it. I know the triad even has a funny thing to the frame as to where you cannot swap it with a spyder frame.

I've hitched a Spyder frame to it before. It's a simple sear tripping mechanizm frame. I'm sure I could use an Eblade if I personally wanted to.

[Fig]

New Update! We need a double clamping style feedneck like those of the Ego Feeds. Any will be looked at, thanks!