Nano cocker build

[mr.mag218]

looking for info on the nano cocker. How to's would be nice also. im looking at building one with an e1 frame and such. i really want info on the one that was floating around here for a while. please and thank you for any and all advice.

[PsychoBaller]

Head on over to www.halfcocker.com

They have info, couple how-to's, and pictures on many types of Cockers; half, micro, turtle... etc. etc.


-baller

[craltal]

nano cockers are PGP's that have been converted with the addition of pneumatics. I know Punisher did some, but i believe there were some others out there.

EDIT: halfcocker.com doesn't have any info on the nano's

[SR_matt]

only thing with a nano built out of a PGP is that it would be very hard to get a high rate of fire out of it with out doing some massive internal refabs... then again thats not to hard to do if your building a full blown nano any way.

if you are going to build a nano cocker you might want to just try to fabricate/ get it fabricate a pgp-like body out of aluminium with all the extra parts you need combined into it. there was a thing up a while ago about soem one that built up a pgp from aluminium and had liek braces to hold the tubes togeather, it looked pretty cool.

-matt

[The Action Figure]

not mine but

[mr.mag218]

thats what i want to build. more how to's would be great on that one.

[craltal]

i don't know if anybody has built one themselves. The only ones I have ever seen have all been built by airsmiths so there very well may not be a how-to

[Toll]

Looks relatively easy if you have tools that can metal work

[RRfireblade]

thats what i want to build. more how to's would be great on that one.

Not much to it but you have to be proficient at soldering.

Seperate the stock tubes , configure the feed set up of your choice , assemble and solder it together.

Need a tap or lug for air to the chamber soldered , need a mount for an LPR , Ram and 3 Way of your choice all soldered. 3 way links to trigger like a typical cocker , ram to bolt in similar fashion and basically that's it.

Fun little project but never much of a performer. Small but heavy and slow ROF.

[jay8541]

not mine but

I used to own that marker

[txaggie08]

what kind of ROF were you getting?

[mr.mag218]

heres what im looking at right now. Im sending the body out to be modded for feedneck probably to luke, and while its there maybe he could tap it for the air adapter. now what im concerned with is my bolt options as well as the pump arm seeing as im missing the pump arm and handle on the pgp that i have. any ideas or options?

[wjr]

I suggest elliciting the help of Rainman on this project. This is the kind of thing that he's good at.

Head on over to MCB and pm him.

[mag_lover05]

any custom shop like palmers or punishers could probly do this... i dont think anyone has ever done this themselves.

[jay8541]

what kind of ROF were you getting?

I had it and she was not working so I sent it to a better home in a trade