Freak or Several Boomsticks

[kickass68mag]

freak it

it will have more inserts and bore sizes and in my opinion a freak is more accurate and will cost less then getting more boomers

[Hysperion]

who cares how many inserts there are on the freak? how many of those are you actually going to use considering that most paint is .688? The only insert on the freak worth having is the .689 and then maybe a .693 in case it's hot out and the paint is swelling. Noone actually uses all seven inserts. And quite honestly, if you think the freak looks better, you haven't seen an anodized front shocktech dye boomy ......I'm going to have both barrels but not a total freak, just a stainless cocker back, blue 12" tip and bores .689 and .693

[liigod]

3 bores if corectly made is all you need, and the bomstick the doesnt move. The inserts move and if you DO break paint which is unlikely on boomers theyar e easy on paint, compared to freaks which DONT self clean. you pull it out and clean it. If i had teh money i owuld have 3 boomers, right now i have one 10 inch that fits rps paint. I love it. And dont get an SS back for a freak. They are just for looks and to add weight, the inserts are what touch the balls so ss wont help them SLIDE or whatever ppl say. Anyway thats my 2 cents.

[DarkRipper]

3 Ultralites, at around 85 each. You don't need the stainless backs.


DR

[Hysperion]

That's why I want the stainless back and blue freak front, for looks ......I think the black is fugly and that the freak overall, while a decent barrel system, is about the most overrated item in all of paintball.....just my .02

[udtseal]

CP KIT CP KIT CP KIT CP KIT CP KIT CP KIT!!! BEST YOU CAN BUY!!!!

[-�on-]

Ok, here is the low down on both barrels. I know this for a fact, if you had a mag and someone set a whole crap load of boomsticks with differnt bore sizes in front of you and a freak kit what would you go for? Problay all the boomsticks becasues it says "dye" on it. I would go with the Freak, why? Mainly becasue I had a 12 inch AA on my emag and my friend had an 18inch boomer on hi P/F mag and 12 inches of my AA with Rifled porting was more accurate than stright porting. I think thats what mags like. Then if you have a gun like an angel, cocker, ematrix and what not they seem to like stright porting quit a bit. Why? Maybe becasue they run on less pressure? Maybe becasue they are closed bolt and blow forwards and mags a blowbacks.? O have no idea why thats just what I have noticed...Thats my .2 cents.

[Miscue]

I have the CP Kit, like it a lot.

[-�on-]

Miscue- I like your gun a lot

[crakonpr]

do the freak inserts move slighty? enough to throw off accuracy?

[liigod]

Yes they move, quite a bit when the orings start to wear. No its not really enough to matter in acrcyracy. Or atleas thats what these mag ppl say about their barrel system. They say that if it did move the rage that it would be accefted at is greater than the effective range of yer gun. I dont reallly belive all the crap in these forms anymore, its just too much propaganda, but the people are cool so i stick around.

[crakonpr]

the J&J 2piece and the JT two peice... do these have diff. bore size backs?

[p8ntballa]

If i were you I would get a CP kit, less porting for paint to get into if you chop, than a freak. Then I would get a J&J ceramic. J&J's seem to have a smaller bore than the freak's or cp's smallest bore.

[LaW]

I don't know about you guys but i've seen people with freaks use almost 6 of the different inserts... like .688 .691 .693 and some smaller ones and so on... I'll have my freak soon and am going to do some tests including purposly breaking some paint and seeing what happnes etc...

[Hysperion]

I think it's really a mute point because people with Freaks will swear by the Freak while people with boomys will argue the same. But now that I own both I can say that I like my boomy better because it *looks* easier to clean. I only got the .689 and .693 bore with my freak and am already thinking about getting rid of it. I bet if the CP kit was made by smart parts, the freak wouldn't be bought by anyone. 90% marketing 10% performance except AGD of course