max flo micro question

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • phat4life07
    Ann Arbor, Michigan baby!!
    • Dec 2006
    • 327
    #1

    max flo micro question

    okay so i just got my max flo micro and a tank today in the mail, but the reg is unscrewed from the tank.

    first: is it safe to do it myself just to screw the reg onto the tank or should i take it to my field? and do i need loctite?


    second: the two safe disc on the reg is definitely wrong (at least one of them) the top one is a 7500 psi disc, and the bottom one is a 5000 psi..... what is the correct disc for max flo micro?!?


    thanks in advance!
    Tags: None
    • athomas
      Of course it works-its AGD
      • Jan 2002
      • 8039
      #2
      Yes it is safe to screw into the tank. They are made to come off for transporting. Don't use locktite. No sealers are to be used on these threads.

      If the setup is used for 4500psi, then the 7500psi burst disk is correct. IF you are using 3000psi then 5000psi is the proper burst disk.
      Except for the Automag in front, its usually the man behind the equipment that counts.

        Comment

        • phat4life07
          Ann Arbor, Michigan baby!!
          • Dec 2006
          • 327
          #3
          nooo! what i meant is, on this reg i own right now, there are two disc, the top is is a 7500 and the bottom is a 5000, its suppose to be like 7500 and 1800 or something, one is for the low output pressure

            Comment

            • neppo1345
              I Will Eat Your Children..
              • Oct 2005
              • 1913
              #4
              Originally posted by phat4life07
              nooo! what i meant is, on this reg i own right now, there are two disc, the top is is a 7500 and the bottom is a 5000, its suppose to be like 7500 and 1800 or something, one is for the low output pressure
              So hang on.

              You're asking about your current reg, or the micro max-flo?

              If you're talking about the micro: they aren't backwards. (top disk should be 7.5k and bottom should be 1.8k)

              Are you sure it doesn't say 1.5?

                Comment

                • phat4life07
                  Ann Arbor, Michigan baby!!
                  • Dec 2006
                  • 327
                  #5
                  Originally posted by neppo1345
                  So hang on.

                  You're asking about your current reg, or the micro max-flo?

                  If you're talking about the micro: they aren't backwards. (top disk should be 7.5k and bottom should be 1.8k)

                  Are you sure it doesn't say 1.5?
                  im talking bout the max flo micro, the two discs are 7.5k on top and 5k on bottom.

                  so its suppose to be 7.5k on top and 1.8k on bottom?!?!

                    Comment

                    • Ydna
                      Paintball Manufacturer

                      • Apr 2004
                      • 264
                      #6
                      Yeah that's correct, should be 1.8 on the bottom, for the output.

                      Unless you have the ultra-Hp version...lol
                      Andy "Ydna" DuBuc
                      Nummech Products & ZDSPB

                        Comment

                        • Pneumagger
                          I like 'Mags.

                          • Jun 2006
                          • 3556
                          #7
                          I have a Maxflo micro... it should be a 1.8 on the bottom. Just screw the reg on tightly, you'll be fine... No locktite unless you never wanna get it off.

                            Comment

                            Previous template Next
                            Working...