Mongoose's Pneumag!!!

[cyberave68]

OK so I finished the Pneumag i was building for Mongoose. Here are a few pics to see and even a plain old before pic just to see the work done.

BEFORE


Ok so now that pic is out of the way...
Black X-valve with ULT
Black Exile body (Fixed per LASRSKTR flaming me... )
CCM feedneck with custom dust Red finish ano on band (Ano done by me)
Custom cut RT Pro rail, ULE and milled for air lines, same custom dust Red ano (rail done by me)
Black Intelliframe ULE milled with Viper trigger, MSV-2, MPA-3 (Pneu's done by me, saftey even works!!!)
Vert ASA with extra front threading for LPR
Black tickler LPR
RT bike grip anoed to match
Drop and duckbill ASA also anoed to match...

Ok now some more pics...


A veiw of the internals...

[GroovYChickeN 2.o]

Wow! I like.

I should build a pneumag someday.

[biojuggernaut]

Wow... looks bad ***. I really like it. One of the best Pneumatic mags ive ever seen.

[lasrsktr]

lol..... you've been in the mag game long enough...

That there is an Exile body...

just busting ya up....

That pneumag looks CLEAN....

[Pneumagger]

OH SNAP...

How light is that trigger with the long MSV-2 leg? Is the pull still short enough and the return fast enough to keep short stroking to a minimum?
We need Vids

[PsychoBaller]

Pretty Pretty Polly...


Very nice. Still looking into having something like this done this summer, cept with a Tac-1.

[Mongoose]

Im speechless. Cant wait to see her in person!
THANK YOU VERY, VERY MUCH CYBERAVE68.
Now we gotta name her!
You should have taken some pics with your grip frames on.
i'm gonna try to wait to debut her at the Jersey Nam game!
Thanks again
-Goose-

[toXicpb]

So how much do you charge to pneumag something?

[t0nnn]

look at that beast! can't wait to see that in person

[cyberave68]

That there is an Exile body...
just busting ya up....

See i fixed it jeez!!!.... It was late and i was tired

OH SNAP...

How light is that trigger with the long MSV-2 leg? Is the pull still short enough and the return fast enough to keep short stroking to a minimum?
We need Vids

Ok so the trigger pull is just a bit longer but i cant seem to measure it properly. If i didnt have one alreadly that i cut the lever down i would never know the difference, it so minor. It does make the pull alot lighter. I was ripping it (just air) the other night i was testing/tunning it. It was a little different once I put paint into it. Had some weird numbers over the chrono. I stilll need to adjust some things and change to the stonger bolt spring. I did short stroke it a bit but still needs a bit of tunning. I didnt seem to have any probs with the return of the lever/trigger. But so far it works well...

Im speechless. Cant wait to see her in person!
THANK YOU VERY, VERY MUCH CYBERAVE68.Now we gotta name her!
You should have taken some pics with your grip on.
i'm gonna try to wait to debut her at the Jersey Nam game!
Thanks again
-Goose-

Gald you like it Mongoose... Names??? not to good at that part, but you should ask AO for help? As for the grips just havent had a chance to make those. I'll let you post those pics when you get it back.
Who did you say did the ULE milling on the Intelli?

To anybody else thanks for the comments...

[Mongoose]

See i fixed it jeez!!!.... It was late and i was tired


Ok so the trigger pull is just a bit longer but i cant seem to measure it properly. If i didnt have one alreadly that i cut the lever down i would never know the difference, it so minor. It does make the pull alot lighter. I was ripping it (just air) the other night i was testing/tunning it. It was a little different once I put paint into it. Had some weird numbers over the chrono. I stilll need to adjust some things and change to the stonger bolt spring. I did short stroke it a bit but still needs a bit of tunning. I didnt seem to have any probs with the return of the lever/trigger. But so far it works well...



Gald you like it Mongoose... Names??? not to good at that part, but you should ask AO for help? As for the grips just havent had a chance to make those. I'll let you post those pics when you get it back.
Who did you say did the ULE milling on the Intelli?

To anybody else thanks for the comments...

That intelli came from rogue "themagsmith"
Next up will be the chimera frame!!

[Ninjeff]

nice.

[snoopay700]

I can't say that i don't like the color scheme, nice job on that.

[cyberave68]

OK you wanted a vid Mongoose posted one here...

http://www.automags.org/forums/showthread.php?t=214498

[BigEvil]

I saw that thing in action yesterday. Great work.