Do they work with emag lowers (stock lowers and stock classic valve). Thats all i need you to let me know. If you feel the need to explain why or why not be my guest.
-
-
they SHOULD work. you might need an emag on/off valve with the correct pin size though.t33kyboy "So if a cat is dropped from 11 inches, it will most likely die." -
I mean a stock classic valve with stock emag lowers.
They shouldnt work together for the reason you mentioned. The on/offs used are of different deigns and dimensions.Comment
-
Stock, no. new on/off, yesstay proud, Stay mechanical!
And my feed back is at: http://www.automags.org/forums/showthread.php?p=1771790#post1771790Comment
-
I did this with an emag on/off in my classic valve, but to be honest with you I dont rember if I tried it with the stock on/off or not. I know I didnt have any problems running semi, I didnt try pusing it to the limits or anything though.Comment
-
You can put a classic valve in an emag if you use the emag on-off assembly. You always need to use the emag on-off assembly with the emag lowers. If you use an emag grip frame on a classic mag rail, you will need to use a micro-emag sear assembly.Except for the Automag in front, its usually the man behind the equipment that counts.Comment
Comment