Will RF chip fit on Morlock board?

[RavishingEddie]

Well my friend is getting out of paintball soon and he is selling everything, including his Pulse hopper and RF chip. I was thinking of picking it up from him for a project of mine, but wanted to know first if I would be able to attach the RF chip to the Morlock board.

The reason I am wanting to use the Pulse loader as opposed to a VL jr is for 2 reasons.
The first is because the pulse adds more weight which is good, because it will reduce kick on a very light mag.
The second reason is because the RF chip would allow me to shoot with eyes off.

[BigEvil]

Theoretically, it should run off the accessory port... BUT you might want to check with our good friends at TAG about it.

[neppo1345]

I thought the RF chip was soldered inline with the solenoid.

So in theory it will work with any electronic gun.

If I'm wrong, someone please correct me.

[surfbum]

I thought the RF chip was soldered inline with the solenoid.

So in theory it will work with any electronic gun.

If I'm wrong, someone please correct me.

this is correct

[rkjunior303]

DC should be able to make you a harness so you don't need to solder.

[txaggie08]

It can be soldered inline but it should also work with an accesory port on guns that have them....