So I finished the EP Mag I've been working on and finally got the camcorder out.
It has a predator board in it and I was shooting it on "hyper mode" (shoots on pull and release) to see how fast the gun would get going. Little did i know that all I would end up doing was max out the loader. The loader cant sustain much more than 20bps bursts for more than .70 seconds or so. The batteries were good in everything and I had 3000 psi in the tank. Also, the paint was 100% crap, and after the 1st barrel break it was shooting like a 5 foot radius
Micro Maxflo @ 800psi
Xvalve Level X (the LX could've done etter and saved me some cleaning
)
Dwell, 18ms
Mode, Hyper
No Eyes
No QEV
Overall It was a blast to shoot. I know it will keep up with the 15 bps fields limits with ease anyways.
VIDEO HERE
It has a predator board in it and I was shooting it on "hyper mode" (shoots on pull and release) to see how fast the gun would get going. Little did i know that all I would end up doing was max out the loader. The loader cant sustain much more than 20bps bursts for more than .70 seconds or so. The batteries were good in everything and I had 3000 psi in the tank. Also, the paint was 100% crap, and after the 1st barrel break it was shooting like a 5 foot radius
Micro Maxflo @ 800psi
Xvalve Level X (the LX could've done etter and saved me some cleaning
)Dwell, 18ms
Mode, Hyper
No Eyes
No QEV
Overall It was a blast to shoot. I know it will keep up with the 15 bps fields limits with ease anyways.
VIDEO HERE
I have been contimplating this or a pneumag but I have a old morlock (sp) that I think I could make work with this.
Comment