Air America parts

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • GroovYChickeN 2.o
    Groovy...

    • Jan 2007
    • 322

    #1

    Air America parts

    So I have a messiah reg on my pump and it is really inconsistent at the chrono. I looked at ebay but I could only find single parts. (I.E. one o-ring) Is there somewhere else I could pick up a rebuild kit?
  • kruger
    KRUGER GRIPS

    • Jun 2004
    • 1915

    #2
    If I am not mistaken AA went out of retail business. There was a guy on PBNation that sold parts for a while, but I am not sure is he is still doing it. I think that the guys that used to run AA, or at least the PB side of it, started a company called Gorilla Air, and the parts may be available from them. Just shoot them an Email and ask. Sorry, but that is all the info that I have on it.
    WOW, sigs. Havent seen these in a while here on AO.

    Comment

    • GroovYChickeN 2.o
      Groovy...

      • Jan 2007
      • 322

      #3
      Yeah AA is gone. Dave one of the guys that owned AA sells parts on ebay but I could not find a full rebuild kit. Thanks for the on Gorilla Air I will have to check that out.

      Comment

      • Spaceman613
        Guinness taste tester
        • Jan 2002
        • 550

        #4
        Might want to try older retail stores like I&I.

        Btw, was a great time playing!!!
        http://www.spaceman613.net

        http://www.bunkerboyz.com for CCM and your pump paintball needs.

        Comment

        • Ydna
          Paintball Manufacturer

          • Apr 2004
          • 264

          #5
          Yes, try to get a hold of guerilla for it. Actually try scott at guerrillaair.com
          Andy "Ydna" DuBuc
          Nummech Products & ZDSPB

          Comment

          • Shane-O-Mac
            Registered User
            • Sep 2002
            • 1045

            #6
            Look for the ebay store AAchopshop. They have seats. The piston 0ring is a 16-70 urethane, that you should be able to find somewhere fairly easy. Thats about all that you need. If the pin that sits on the seat has a heavy white ring around the tapered part, you need a new pin. If you crack the body halves, you must replace the seat also, it crushes between the body halves, and once used it wont work well after it is removed once. Before you blame the reg, make sure you test it to make sure the recharge is bad or doesnt reset to the same pressure, before doing anything drastic. Most times, its paint problems, as a pump gun doesnt shoot fast enpough to have recharge issues, unless they are REALLY bad. OR for a low bps gun like a pump, you can use a mag seat and reg pin, but you must use them both, otherwise it gets inconsistant. Start by unscrewing the adjuster and removing the piston, clean and lube it with air tool oil or other paint gun oil, do NOT use grease or Dow33, slows the reg down. Pm me if you need more help. I used to be an AA tourney tech.
            I have nothing good to put here...........


            Comment

            • going_home
              Hebrews 13:8

              • Dec 2004
              • 8343

              #7
              AA Parts Kit

              Originally posted by GroovYChickeN 2.o
              So I have a messiah reg on my pump and it is really inconsistent at the chrono. I looked at ebay but I could only find single parts. (I.E. one o-ring) Is there somewhere else I could pick up a rebuild kit?

              Theres a parts kit on Ebay, 3 days left.

              http://cgi.ebay.com/air-america-part...QQcmdZViewItem

              Comment

              • Shane-O-Mac
                Registered User
                • Sep 2002
                • 1045

                #8
                Originally posted by going_home
                Theres a parts kit on Ebay, 3 days left.

                http://cgi.ebay.com/air-america-part...QQcmdZViewItem


                FYI, that kit doesnt have th eright piston o-rings in it. But a good price for the seats and reg pins...................
                I have nothing good to put here...........


                Comment

                Working...