Micro-pneu, continued...

[shorty24]

Well, finally set up the way I wanted and functioning! However, this run of micromag clone bodies doesn't accept most newer AC threaded barrels, so...the final setup probably won't be using a micro body. I have an Alpha rail and ULE body in the mail right now...

On to the pics:




Sorry for the crummy pics, I was in a hurry...

[nate2k191]

don't clean that mag ever again.

[robertsr1811]

Those threads just need to be retapped. They cocker threads, they just aren't cut deep enough. Anyone with a cocker tap should be able to set you up.

[rkjunior303]

yeah, aren't those the "fake" micro bodies?

[shorty24]

yeah, aren't those the "fake" micro bodies?

And yes, they were a run of micromag clone bodies, not done by PTP. Tolerances aren't the greatest

[zipity_Bop]

Oh hot mag. Free up.

I lol'd

[Pneumagger]

as long as the valve fits, you should just be able to ream the breach to size and have someone with a cocker tap chase that for you.

[shorty24]

And where might I find someone with a cocker tap?

[Smoothice]

And where might I find someone with a cocker tap?

Good luck with that. I had no luck finding one when I was looking. If you do come across one please let me know.

[Pneumagger]

You could just buy the cocker taps for like $60-$70 bucks somewhere. Probably be alot cheaper than chopping up a new body or buying the new rail/body, plus you could make profit back offering to tap bodies.

[cyberave68]

you can buy one on ASP for $88

http://www.airsoldier.com:8080/cgi-bin/mivavm?Merchant2/merchant.mvc+Screen=PROD&Store_Code=AOS&Product_Code=COCKERBARRELTAPSET&Category_Code=MISC

[luke]

How many people need this done?

I will concider buying the tap and providing the service if enough people need it...

[shorty24]

Hmm...already got the new body and rail on the way, and I pretty thoroughly destroyed the threads in this body anyway with an old barrel. Think I'll pass on buying one for now, but thanks guys!

[shorty24]

How many people need this done?

I will concider buying the tap and providing the service if enough people need it...

me

[Pneumagger]

you can buy one on ASP for $88

http://www.airsoldier.com:8080/cgi-b...gory_Code=MISC

You can get alot of things ASP sells for like 60% of that price if you take the time to find it yourself. For example... His mac noids are $50, you can get them for $29 from a Mac retailer if you know what model you need. His MPA-3 is 10 but it's only like $5 from clippard.

Bottoming tap $31 http://www1.mscdirect.com/CGI/NNSRIT...MT4NO=25125655
Plug Tap $31 http://www1.mscdirect.com/CGI/NNSRIT...MT4NO=25125655

Shorty, you would only need the bottoming tap to fix your problem it seems.