OLD with a capital Z OLD Phantom

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mobsterboy
    Mr.StealYoDallara

    • Aug 2004
    • 2371
    #1

    OLD with a capital Z OLD Phantom

    Buddy of mine said he got it when he was 15... Well he's 28 now, and he said it was a few years old then so We're looking at pretty flippin old.
    Right feed body with built on barrel all one piece. The frame, now maybe I'm just not well versed on phantoms, but the frame is definitely not ULE by any means. Very solid and heavy. The Valve has a built in back bottle adapter and is angled. Shoots like a champ.



    RAWR
    Dallara Den
    Tags: None
    • z1p101
      Registered User
      • Jan 2007
      • 32
      #2
      Question?

      Can you still get power tubes, cup seals and spring kits for those old pump guns?

      I have been out of the loop for a long time.

        Comment

        • mobsterboy
          Mr.StealYoDallara

          • Aug 2004
          • 2371
          #3
          I believe CCI still makes phantoms so I dont see why you couldn't
          RAWR
          Dallara Den

            Comment

            • neppo1345
              I Will Eat Your Children..
              • Oct 2005
              • 1913
              #4
              Originally posted by z1p101
              Can you still get power tubes, cup seals and spring kits for those old pump guns?

              I have been out of the loop for a long time.
              Naw, the new powertube is a lot shorter...

              I ran into that problem when I went to rebuild my old unibody a few months ago.

              I think the guy who gave it to me told me he won it at a tourney in 1990...

              If you need parts call CCI and talk to Mike, or his wife.

                Comment

                • Skeeter
                  PBC Owner
                  • Jan 2003
                  • 121
                  #5
                  Originally posted by z1p101
                  Can you still get power tubes, cup seals and spring kits for those old pump guns?

                  I have been out of the loop for a long time.

                  Yep. You can still get all of the parts, but if you upgrade the power tube, you need to get a new bolt (tuned port compensator) as well. The hammer might be the same across generations, but check with Mike @ CCI to verify.

                  The new cup seals might not fit the old valve/PT assembly, so that may need to be swapped out as well.

                  Shouldn't need spring kits with a newer bolt. Velocity adjustment is down the barrel with the appropriate adjustment tool (or a very long standard screw driver).
                  Time is what keeps things from happening all at once

                    Comment

                    • z1p101
                      Registered User
                      • Jan 2007
                      • 32
                      #6
                      Thanks everyone

                      But I need the parts for an old Lapco Spectre which has a bore drop bolt and I believe the fhantom uses a breech drop bolt so I can't swap the bolts.

                      The power tubes and springs used to be interchangeable for any nelson based gun and I will need the old stuff.

                        Comment

                        • z1p101
                          Registered User
                          • Jan 2007
                          • 32
                          #7
                          From what I have read

                          I think that carter may be able to help with problem if anyone has this problem in the future.

                            Comment

                            Previous template Next
                            Working...