AGD Intelliframe mounting plate
$15 ea
Plate is made from 1/8" aluminum and machined to fit flush to the face on the left side of the frame (behind the intelli switch mount)
The factory brace must be removed or machined down for the plate to fit in the frame.
Plate comes with :
2) 6-32 screws
2) 6-32 nuts
2) #6 flat washers.
Picture of front and back of plate.
(Frame only requires 1 plate)
Inside of frame
Plate is flush to outside surface.
$15 ea
Plate is made from 1/8" aluminum and machined to fit flush to the face on the left side of the frame (behind the intelli switch mount)
The factory brace must be removed or machined down for the plate to fit in the frame.
Plate comes with :
2) 6-32 screws
2) 6-32 nuts
2) #6 flat washers.
Picture of front and back of plate.
(Frame only requires 1 plate)
Inside of frame
Plate is flush to outside surface.
Comment