Pump Mag Rail Milling

[warpedmephisto]

Hi All,

I've got my fixtures made and code perfected and am ready to start taking in 'Mag rails and bodies to be milled to work with the nice pump kits Jay made for us.

Now with two ULE Milling Style Options!!!

See pics below for ULE Milling Style 1 and click HERE for pics of ULE Milling Style 2!!

Prices:
AM/MM rails: $25
RT length rails: $30
All Bodies: $30
NEW! Pump ULE Milling Style 1: $30
NEW! Pump ULE Milling Style 2: $50

Get a body and a rail milled at the same time and its only $45
NEW! Get a body, rail and pump ULE Milling Style 1 at the same time and its only $70
NEW! Get a body, rail and pump ULE Milling Style 2 at the same time and its only $90

These prices include return shipping (First Class USPS in a bubble mailer). You can upgrade to boxed Priority shipping for $5-$10 more depending on what you send in. I can also do international shipping for our friends up north and elsewhere.

Payment:
I accept PayPal to [email protected] as well as money orders (PM for more info).

Contact:
You can email me at [email protected] (preferred) or PM me on here. My shipping address is:

Andy Grueninger
129 E. Dunn St.
Edwardsville, IL 62025

Additional info:
The way I fixture the rails while milling is no more damaging than when the rail is mounted on the body and frame - so fear not with those fancy ano jobs! I've done many splash Eclipse rails, all of which turned out great. Also, I'm a moderator over on PBN and have plenty of feedback over there. Turn around time should be about a week, although confirm with me beforehand. There are some fancily milled bodies that my current fixtures will not work with. If you have a body that is either round, or has flat sides, chances are I can do it. If its something else, check with me first and I can let you know if its possible or not.

Pics!











The waves on the pump rod ramp aren't as pronounced as they look - the actual cut is smooth as glass.




ULE Milling Style 1:





That is all!

[Mongoose]

they look great.
i will be sending mine in.

one question: can i use the rt rail and jays kit without any extra modding? or will i need a longer rod? "sounds funny"

thanks

[warpedmephisto]

That you might want to ask Jay. The RT rail I did for a customer, not my own marker. I don't have a kit and don't know if it'll work out. I would assume so because the customer got Jay's kit and intends to use the RT rail with it, but thats only an assumption. When I send the rail back to him, he can let me know if it works out for him. The RT rails are only a little over an inch longer than the stock rails and I think the rod can suffice that, but thats a complete guess.

[olinar]

I would think that a longer pump rod and arm would be needed.

If im mistaken, Ill be sending in a old style tac rail for this conversion.

[warpedmephisto]

Duh, I didn't think to look at the spacing from the twistlock detent hole to the front grip hole. Looks like something would need to be done there...

[Rudz]

U need a classic length rail or a longer rod, I have an emag rail on my minitac pump, but it was cut to classic size

[warpedmephisto]

Hmm... would have thought more people would be interested in this.

[olinar]

I wouldve figured lots of people would be eating this service up. Im going to wait until you can figure out a jig for the body milling as well. Im going to need a body and rail done.

That will give me some time to get all the parts for my pump-tac together!

[Rudz]

I wouldve figured lots of people would be eating this service up. Im going to wait until you can figure out a jig for the body milling as well. Im going to need a body and rail done.

That will give me some time to get all the parts for my pump-tac together!

thats ok, im the only one with a minitac pump, and matching dust black valve...lol i love tac pumps

[mt84]

Salut warpedmephisto

Like what you've done. Still waiting for an answer from a local chap to do the mod to my rail. If I don't ear from this chap within 7 days, I'll let you know, may have a couple then.

PS. you on Tribal Owners.

~mt84~ there.

[Mongoose]

im intrested, i want to send in my body and rail..

[warpedmephisto]

Give me until later this week and I'll have the fixture for the bodies done and have that ready to go. I can start taking in both bodies and rails though for people wanting to get them done at the same time, so I can go ahead and mill the rails. Just email me.

[warpedmephisto]

Wow, no one?

[DarkArmorPB]

Wow, no one?

I need the work done on my body and rail. Are you going to be at Xtreme for the Chili Bowl? I can give you my stuff there if you want.

[email protected]


DA.

[kokak]

I have a ULE body I need Milled... just PM me the particulars and I will PayPal you the cash and ship out the body!