Rules:
Please post here first...
Paypal, Mo are accepted here...
SHIPPING is $1.50-$4 (by weight) for any parts order(kits not included)
Any body wanting priority shipping on Pneumag kits or Mag mods add $2.50 or
its regular price for a parts order $4.65
International orders are $11.00 shipping global priority (6-10 days)
Please contact Loguzzzzzz as he is selling the kits now. Prices are different and I will contact Loguzzzzzz and edit the thread for him....
Paypal is prefered...
Please post or PM first and list the color of the parts and your AO name in the Paypal message area...Thanks,
Here is a good place to go with questions on "HOW TO PNEUMAG"
For those of you still looking to make a pneumag here is a little help on finding some parts to make the install a little easier.
Here is what you get/need in a complete kit...( Minus the LPR!!!)
LIST:
FABCO MSV-2 (WITH LEVER)- - - - - - - - (with mount screw and nut)
CLIPPARD MPA-3 (COMPLETE)- - - - - - - (CUT DOWN TO SIZE AND WITH ROD INSIDE)
2 FT. OF AIR LINE (BLACK OR CLEAR) - -
STRAIGHT FITTINGS (BLACK OR WHITE)
1 90* FOR MPA-3 (BLACK OR WHITE) - - -
2 MPA-3 MOUNTING SET SCREWS- - - - - -
1 TRIGG STOP SET SCREW- - - - - - - - - -
---------------------------------------------
Pneumag kits will sell for - - - - - - - - - - - - - $40.00 shipped first class or add $2.50 for priority shipping...
I now stock Lukes's RAM and you get it in the pneukit set up that I make.
Here’s what they look like...
Pneumag kits.... One packaged and one out to see the all the parts.
Pistons were re-assembled with a little lithium grease...
Or the parts individually are:
FABCO MSV-2 (WITH LEVER)- - - - - - - - - - - $15.00
CLIPPARD MPA-3 (COMPLETE)- - - - - - -
(CUT DOWN TO SIZE AND WITH RAM INSIDE)$20.00
CLIPPARD MPA-3 - (STOCK)- - - - - - - - - - - -$10.00
1 FT. OF AIR LINE (BLACK OR CLEAR) - - - - - $1.00
1 STRAIGHT FITTINGS (BLACK OR WHITE) - - $1.00
1 90* FOR MPA-3 (BLACK OR WHITE) - - - - - $1.00
1 MPA-3 MOUNTING SET SCREWS- - - - - - - - $0.25
1 TRIGG STOP SET SCREW- - - - - - - - - - - - -$0.25
Luke's RAM - - - - - - - - - - - - - - - - - - - - - - $3.75
Other pics of the rest of the parts...
Magnet mods for your pneumags....
I also have some Chimera mount brackets for the MSV-2....(also works on a ULE'd intelli)
Magmods are $20 shipped first class
Please note that you need about 3/8" to 1/2" of the lever
sticking up past the MSV-2 to use this mod. (unless you have other ideas???)
Mount brackets with all hardware needed for mounting are $7
Here are 2 pics of the Magmods installed.
The top one is how close you can adjust it for a stong return,
and the lower one a bit farther away for a softer return...
Please post here first...
Paypal, Mo are accepted here...
SHIPPING is $1.50-$4 (by weight) for any parts order(kits not included)
Any body wanting priority shipping on Pneumag kits or Mag mods add $2.50 or
its regular price for a parts order $4.65
International orders are $11.00 shipping global priority (6-10 days)
Please contact Loguzzzzzz as he is selling the kits now. Prices are different and I will contact Loguzzzzzz and edit the thread for him....
Paypal is prefered...
Please post or PM first and list the color of the parts and your AO name in the Paypal message area...Thanks,
Here is a good place to go with questions on "HOW TO PNEUMAG"
For those of you still looking to make a pneumag here is a little help on finding some parts to make the install a little easier.
Here is what you get/need in a complete kit...( Minus the LPR!!!)
LIST:
FABCO MSV-2 (WITH LEVER)- - - - - - - - (with mount screw and nut)
CLIPPARD MPA-3 (COMPLETE)- - - - - - - (CUT DOWN TO SIZE AND WITH ROD INSIDE)
2 FT. OF AIR LINE (BLACK OR CLEAR) - -
STRAIGHT FITTINGS (BLACK OR WHITE)
1 90* FOR MPA-3 (BLACK OR WHITE) - - -
2 MPA-3 MOUNTING SET SCREWS- - - - - -
1 TRIGG STOP SET SCREW- - - - - - - - - -
---------------------------------------------
Pneumag kits will sell for - - - - - - - - - - - - - $40.00 shipped first class or add $2.50 for priority shipping...
I now stock Lukes's RAM and you get it in the pneukit set up that I make.
Here’s what they look like...
Pneumag kits.... One packaged and one out to see the all the parts.
Pistons were re-assembled with a little lithium grease...
Or the parts individually are:
FABCO MSV-2 (WITH LEVER)- - - - - - - - - - - $15.00
CLIPPARD MPA-3 (COMPLETE)- - - - - - -
(CUT DOWN TO SIZE AND WITH RAM INSIDE)$20.00
CLIPPARD MPA-3 - (STOCK)- - - - - - - - - - - -$10.00
1 FT. OF AIR LINE (BLACK OR CLEAR) - - - - - $1.00
1 STRAIGHT FITTINGS (BLACK OR WHITE) - - $1.00
1 90* FOR MPA-3 (BLACK OR WHITE) - - - - - $1.00
1 MPA-3 MOUNTING SET SCREWS- - - - - - - - $0.25
1 TRIGG STOP SET SCREW- - - - - - - - - - - - -$0.25
Luke's RAM - - - - - - - - - - - - - - - - - - - - - - $3.75
Other pics of the rest of the parts...
Magnet mods for your pneumags....
I also have some Chimera mount brackets for the MSV-2....(also works on a ULE'd intelli)
Magmods are $20 shipped first class
Please note that you need about 3/8" to 1/2" of the lever
sticking up past the MSV-2 to use this mod. (unless you have other ideas???)
Mount brackets with all hardware needed for mounting are $7
Here are 2 pics of the Magmods installed.
The top one is how close you can adjust it for a stong return,
and the lower one a bit farther away for a softer return...
Comment