Pneumag Kits, Parts, Magmods, Mount Brackets And More...!!!!!!!!

[kwood]

where does the rod come from that goes between the MSV-2 lever and the back of the trigger?

[cyberave68]

tring to answer PM's again if i missed you please PM again...

where does the rod come from that goes between the MSV-2 lever and the back of the trigger?

Its included in the kit now, But i used the sear arm pin when i first started doing these...

[zondo]

Its included in the kit now, But i used the sear arm pin when i first started doing these...

Is there any difference in using one or the other?

[cyberave68]

Is there any difference in using one or the other?

yes and no.

They both do the same thing so there it's a NO

You need to sand the sear arm pin down to make it short enuff to work, making it useless anymore. So that way you cant re-assemble it into mech unless you have a spare sear. Thats the only difference. Again i offer a pin in my kits now so you dont need to worry about finding another part.

[zondo]

yes and no.

They both do the same thing so there it's a NO

You need to sand the sear arm pin down to make it short enuff to work, making it useless anymore. So that way you cant re-assemble it into mech unless you have a spare sear. Thats the only difference. Again i offer a pin in my kits now so you dont need to worry about finding another part.

I already have one of your kits, but without the pin. What would it cost separately?

[DEEPSEA]

I am making an egomag and have a solenoid on the way, frame, now all I need is a ram right?

I shot you a pm on BEO, but I need to send in my pneumag if you service them. I would also like to add your mag mod.

pm me or call 619-213-6555
Joe

[vf-xx]

I already have one of your kits, but without the pin. What would it cost separately?

Pin = Nail with the head cut off and sanded down to be smooth.

any other small rod should work.

[joebob09]

Will all of this fit into a chimera frame? I just picked one up and the pneu kit I had from a Yframe won't fit.

[kwood]

tring to answer PM's again if i missed you please PM again...


Its included in the kit now, But i used the sear arm pin when i first started doing these...

if i dont already have one of those pins, how much would it cost to obtain one?
i might also want a MSV-2 (with lever, screw and nut)
so how much for the pin and the msv-2?

[cyberave68]

I already have one of your kits, but without the pin. What would it cost separately?

Well if you really need one i guess if you gave me $1 for shipping i could mail you one. But honestly just about anything small and round should work...

I am making an egomag and have a solenoid on the way, frame, now all I need is a ram right?

I shot you a pm on BEO, but I need to send in my pneumag if you service them. I would also like to add your mag mod.

pm me or call 619-213-6555
Joe

I will PM you...

Pin = Nail with the head cut off and sanded down to be smooth.

any other small rod should work.

Yes that will work just fine...

Will all of this fit into a chimera frame? I just picked one up and the pneu kit I had from a Yframe won't fit.

Yes it should fit into a Chimera. Look at your piston an see if it has been sanded on the side. If not it needs to be so it will fit into the top opening of the frame. PM me if you need more help...

if i dont already have one of those pins, how much would it cost to obtain one?
i might also want a MSV-2 (with lever, screw and nut)
so how much for the pin and the msv-2?

If you need and MSV-2 they are $15 and i'll give you the pin. Just be sure to put that in the message section of Paypal or i will forget...

[Flatliner333]

Sent payment for pnuemag kit and extra 90* fitting. thanx

[Gadget]

Paypal sent for pneumag kit (black fittings, clear hose), magnet mod and international shipping.

Thanks

[splat15k]

PM sent

[edwards]

ho hurry getting back on this question but would a kit fit in a stock frame and do you toke
money orders.

[going_home]

ho hurry getting back on this question but would a kit fit in a stock frame and do you toke
money orders.

The surgeon general has determined that toking money orders may be harmful to your health.