AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026.
Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
OK 2 hours left to go!! Please make sure you understand how this is going to work. PLEASE do not PM me I do not have enough room in my PM box. If you need to ask a question please put it on the forum thread or you can send an email to [email protected] I will be monitoring both the whole time.
If anyone has any questions please do it now!! Before we post the parts!!
are you posting the parts in this thread, or starting a new one. What do we do when AO crashes?
I will post it in my first thread as an edit. Hopefuly AO doesn't crash!!! There are a couple items that are very hard to come by, and the others are just discounted, so if you want extra parts then now is the time to buy them.
2 x Hall Harness
1 x Hall Holder / Bottom
1 x Hall Holder / Top
2 x Positive Terminal
2 x Positive Terminal Nut
2 x Nylon Bushing - Pkg. of 2
2 x Nylon Washer - Pkg. of 2
2 x Hall Mount Bolt
2 x Selector Lever Bolt Maybe
1 x E-Mag Selector Switch
2 x Emag Grip Screw - Pkg. of 6
2 x Battery Saver Plug - Pkg. of 2
2 x Emag Magnet 2-Pack
2 x Emag Safety Spring
1 x Emag Sear Lock
2 x Field Strip Screw Assembly
2 x Emag Trigger Magnet Assembly
1 x Emag Solenoid w/plunger
Update list:
1 x Hall Harness 12$
1 x Hall Holder / Bottom 3$
1 x Hall Holder / Top 3$
2 x Positive Terminal 1.50$
2 x Positive Terminal Nut 1.50$
2 x Nylon Bushing - Pkg. of 2 1.50$
2 x Nylon Washer - Pkg. of 2 1.50$
2 x Hall Mount Bolt 0.50$
2 x Selector Lever Bolt Maybe $$??
1 x E-Mag Selector Switch 12$
2 x Emag Grip Screw - Pkg. of 6 4$
2 x Battery Saver Plug - Pkg. of 2 6$
2 x Emag Magnet 2-Pack 6$
1 x Emag Sear Lock 6$
2 x Field Strip Screw Assembly 16$
1 x Emag Solenoid w/plunger 60$
134.50$
I would like ;
Emag Sear Lock $6
Emag Jumper-Burst mode $2 1 of them
Emag/RT Pro/RT Sear Axle pin $6 , 2 of them
Nylon Bushings (2pk) $0.75 1 of them
Nylon Washer (2Pk) $0.75 1 of them
Positive Terminal $0.75 1 of them
Positive Terminal Nut $0.75 1 of them
2 x Hall Harness
1 x Hall Holder / Bottom
1 x Hall Holder / Top
2 x Positive Terminal
2 x Positive Terminal Nut
2 x Nylon Bushing - Pkg. of 2
2 x Nylon Washer - Pkg. of 2
2 x Hall Mount Bolt
2 x Selector Lever Bolt Maybe
1 x E-Mag Selector Switch
2 x Emag Grip Screw - Pkg. of 6
2 x Battery Saver Plug - Pkg. of 2
2 x Emag Magnet 2-Pack
2 x Emag Safety Spring
1 x Emag Sear Lock
2 x Field Strip Screw Assembly
2 x Emag Trigger Magnet Assembly
1 x Emag Solenoid w/plunger
Total for the order will be $197.50
that is with USPS priority shipping. You have 30 minutes to paypal the total or it goes back on the board!!
I would like ;
Emag Sear Lock $6
Emag Jumper-Burst mode $2 1 of them
Emag/RT Pro/RT Sear Axle pin $6 , 2 of them
Nylon Bushings (2pk) $0.75 1 of them
Nylon Washer (2Pk) $0.75 1 of them
Positive Terminal $0.75 1 of them
Positive Terminal Nut $0.75 1 of them
Thanks
I need to see if BenoitOWN pays. I will then adjust to what you want. and I still have.
I'm also looking for a " ground lug " it goes in the frame ( a PTP E Mag frame , that I bought somewhere ) where the battery makes the ground connection
Comment