Originally posted by Chris Nearchos
I'm sure this will be another great product for the AGD community. Thanks for your work.
-
Sure, promise something you can't possibly deliver. By the way, what is exactly is a WEEKENG? I tried finding it on Wikipedia, but no luck!
I'm sure this will be another great product for the AGD community. Thanks for your work. -
Originally posted by afortuna
lol, believe me, it will happen even if i have to hire santa secret service angels to make it happen.
and my bad....i admit, i am not so great with words. my field is numbers....not letters. so there, i admit. i suck at spelling.
btw, "WEEKEND" was the word trying to go for there.
now everyone get back to work on the harrassment of ptp and their new body.
-ChrisComment
-
Hey Chris...in case you didn't read my last post on my problem thread, I fixed my Micromag, so I won't be needing to send it to you for a tuneup. I was considering sending you my board to get it flashed, but after reading this post, I think I will just wait until you start selling this board, and buy one of these from ya'll. Good work!Comment
-
Originally posted by Ratt
Nice job getting it fixed. i bet that made you pretty darn happy. And alright, jump in line and get ready to beat down P8nt's door to get a board. lol.
-ChrisComment
-
Yea, I was pretty stoked that I was able to finally fix it myself. I was just disappointed that it took me as long as it did. Once I found a post from someone who had the same problem, it took me 3 minutes to fix it. Oh well... I just hope ya'll get those boards finished and on the market before I spend all of my tax return on Tribal guns, parts, and more mag parts, and oh yea, that Styer M-series .40cal that the guys on base are holding for me...Originally posted by Chris Nearchos
Comment
-
missed info
I just wanted to state a piece of info that both ME and P8nt has overlooked to make clear.
with these board setups, you WILL be able to power down your mag via one of the rear frame buttons. This means that you DO NOT need to have your mag milled for a on/off power switch if you do not want to or already have your mag setup with a power switch.
But with this stated, you can still used ACE on/off switchs and the other modded switchs without prblems.
So if you want to finally get rid of the darn little yellow pin and have a on/off switch without any special milling for switchs,ACE setups, or anything like that.....you can now finally have a drop in solution.
-ChrisComment
-
Will my emag rail need any milling to fit the ACE? I already have a body drilled for eyes so that part is taken care of. Also wondering what you guys have come up with as far as eye covers. I'll make sure to check back for updates.
Keep up the good work!
Comment
-
Originally posted by drewkroekerWill my emag rail need any milling to fit the ACE? I already have a body drilled for eyes so that part is taken care of. Also wondering what you guys have come up with as far as eye covers. I'll make sure to check back for updates.
Keep up the good work!
yes, it will still need milling for an ACe if you plan to use one. BUT you wouldnt have to mill the slot in the side for the on/off switch if you didnt want to.
as for eye covers, P8nt has them up his sleeve. He is currently working some final details on them before doing them up.
-ChrisComment
-
Originally posted by drewkroekerWill my emag rail need any milling to fit the ACE? I already have a body drilled for eyes so that part is taken care of. Also wondering what you guys have come up with as far as eye covers. I'll make sure to check back for updates.
Keep up the good work!
I have eye covers planned but not for the release of these boards.
The eye covers are for use with another project.
The replacement main boards will work with both ACE as well as Break Beams so there are plenty of options here guys.
Dont wait on the eye covers to buy a board though,... I have 5 other projects going on now so the eye covers are a "when I get to them" deal.
~ P8nt_______________________
Jai "P8ntbal4me" MenardComment
-
HOLY COW...ARE YOU SERIOUS??? That is awesome!!!Originally posted by Chris Nearchos
Comment
-
I have the money for one of these boards. I would like to get a set of break beam eyes with it. The best way to do it would be for me to ship you my emag and have you do the install and test it. PM me with the cost (or rough idea anyway) when you get the time.
Thanks,
DrewComment
-
I have added some pricing that is being adjusted as we go along to the first post in the thread.
Chris is working on the boards,...
I have paid for the 50 UTBs and wire harnesses already.
Allllllmost there!
~ P8nt_______________________
Jai "P8ntbal4me" MenardComment
-
I changed some parts of the first post to reflect the newer design of the board.
The STOCK ACE plug DOESNT plug into the new Daughter board,.. but FEAR NOT,... we will be offering a NEW wire harness that will! I have all the stuff to make it,...
As stated before,.. the UTBs have been paid in full for this project. So if your doubting,.... give Scenario Dreams a week to deliver them and I will post pictures
The new Ultra-HESs have arrived. I will be making all of them as completed harnesses after Feb. 14th
~ P8nt_______________________
Jai "P8ntbal4me" MenardComment
-
THE UTBs ARE IN!!!!!
Got them today,... all 50 of them with wire harnesses.
One step closer,.....
~ P8nt_______________________
Jai "P8ntbal4me" MenardComment
-
yay, can we pre-order?Comment
Comment