Introducing the Micromag 2009

[going_home]

Unless you will need the vert ASA for anything!! It will be propriatary. So if you think you need one you need to order it.

Wait, the vert asa doesnt come with the body ?
How would you put a gas thru on it without a vert asa ?
I suppose a pistol could be made......

I want a complete MicroMag body with the vert asa.
Still not sure, does the body come complete with MM front ?
I've read this whole thread and just when I think I have it figured out, I find that I dont.

So I need 1 complete MM body with 1 MM front and 1 vert asa.
Nothing extra, just building 1 mag.

I'd like the vert asa tapped on both sides please.

I have paid in full for the body, how much more for the asa ?
And for tapping the other side of the asa ?

Thanks

[Tracy_ptp]

Mine is wrong. I was looking at the PDF and you only have one body with the standard front, an e-Micro front and vertical grip. The ASA is missing (unless it's part of the front grip).

Thanks!

Fixed it

[Tracy_ptp]

Wait, the vert asa doesnt come with the body ?
How would you put a gas thru on it without a vert asa ?
I suppose a pistol could be made......

I want a complete MicroMag body with the vert asa.
Still not sure, does the body come complete with MM front ?
I've read this whole thread and just when I think I have it figured out, I find that I dont.

So I need 1 complete MM body with 1 MM front and 1 vert asa.
Nothing extra, just building 1 mag.

I'd like the vert asa tapped on both sides please.

I have paid in full for the body, how much more for the asa ?
And for tapping the other side of the asa ?

Thanks

The vert is $25. I have you down for a vertical already. To tap both sides of the ASA, Forest said would be $10 or less.

[Tracy_ptp]

She's back for another day with some coffee and Irish whiskey!

I am armed with a glass of wine!!!

[AmyM]

sorry for the delay...

1 Micromag body
1 eEmicro front
1 vert ASA
1 grip

All dust black anno

Thanks for everything!

Amy

[Tracy_ptp]

Right now I am showing 15 unconfirmed. We are very close.

If you would like an extra breech, please let me know now.

I have guys that want to see if they can get it to get milled for "eyes" (ACE)
This is the center piece of the body.
Cost is $60. Please let me know ASAP!!

Let me clarify

We will not drill and tap for the ACE. I believe there is someone here on AO that is more familiar with it than we are. I can send that piece raw and will ano it after it is done.

We are willing to supply an extra breech for people to experiment with if they so choose. We do not use or play around with the ACE system that is why we are not going to try and mill anything for it.



And please don't make my head hurt.

PS I added an extra column on the list the has the breech listed. I will send it to Beemer right now to update it on the first post.

[Hgblues]

If I do not purchase your ASA, does that mean I cannot mount a front grip to the body?

[Tracy_ptp]

If I do not purchase your ASA, does that mean I cannot mount a front grip to the body?

YES

[Hgblues]

YES

Well, I guess you can add a vert ASA to my order since purchasing it from you is really not an "option" if it's the only way I can have a front grip........It will need to be anodized to match the body also...

Are there any other "options" that need to be purchased to be able to use this body with a standard marker setup (such as attaching the grip frame, the front grip, the hopper,etc.) ?

This kinda feels like buying a car, and then having to buy the keys seperate.

[Tracy_ptp]

Well, I guess you can add a vert ASA to my order since purchasing it from you is really not an "option" if it's the only way I can have a front grip........It will need to be anodized to match the body also...

Are there any other "options" that need to be purchased to be able to use this body with a standard marker setup (such as attaching the grip frame, the front grip, the hopper,etc.) ?

This kinda feels like buying a car, and then having to buy the keys seperate.

Sorry, we really wanted to make this universal as we could, the vertical ended up being a tough one. Once you have the vert any standard grip or gas through will screw into it. We are not doing this project for the money, trust me on that. Doing small runs in a machine shop cost $$$$. I wanted to do this because I was asked by a bunch of guys that really wanted it and I wanted to give them something special and because they generated the interest for me to be able to make it happen. Sometimes things get complicated when you are trying to making everyone happy.

[Hgblues]

Sorry, we really wanted to make this universal as we could, the vertical ended up being a tough one. Once you have the vert any standard grip or gas through will screw into it. We are not doing this project for the money, trust me on that. Doing small runs in a machine shop cost $$$$. I wanted to do this because I was asked by a bunch of guys that really wanted it and I wanted to give them something special and because they generated the interest for me to be able to make it happen. Sometimes things get complicated when you are trying to making everyone happy.

I know you were flooded with customize requests, and actually still are getting asked for changes, so I understand it being difficult to get to the final product to accomodate as many requests as possible. I just want to make sure I am able to do 3 things with this body.

1. Attach my EP intelli frame to the body
2. Run either my warp, or center feed hopper
3. Attach a gas thru front grip, just like my RT pro is setup

As best I can tell, the only extra purchase I need to make besides the body, is the vert ASA. Please, correct me if I am wrong. I want to make sure I have all the necessary parts. If that is the case, then you can add the vert ASA to my order, and I would like it to match the body.

thanks!

[Tracy_ptp]

I know you were flooded with customize requests, and actually still are getting asked for changes, so I understand it being difficult to get to the final product to accomodate as many requests as possible. I just want to make sure I am able to do 3 things with this body.

1. Attach my EP intelli frame to the body
2. Run either my warp, or center feed hopper
3. Attach a gas thru front grip, just like my RT pro is setup

As best I can tell, the only extra purchase I need to make besides the body, is the vert ASA. Please, correct me if I am wrong. I want to make sure I have all the necessary parts. If that is the case, then you can add the vert ASA to my order, and I would like it to match the body.

thanks!

Yes, that is correct. As long as the intelliframe does not have wings, it must be flat, like for a RT Pro.

[Hgblues]

Yes, that is correct. As long as the intelliframe does not have wings, it must be flat, like for a RT Pro.

It's actually the frame I purchased new with my rt pro, so I should be fine there.

[Beemer]

And please don't make my head hurt.

PS I added an extra column on the list the has the breech listed. I will send it to Beemer right now to update it on the first post.

New file up at 4.40PM real time, central.

Let me know who makes your head hurt and the possie will lay the smack down.

[Tracy_ptp]

Only need 13 more confirmations!!!!

Please look back a couple pages about breeches!!