Pneumag Tune ups?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • armyboot
    Registered User
    • May 2002
    • 175

    #1

    Pneumag Tune ups?

    Any dealers off pneu mag tune ups?

    I haven't played paintball in years, but have a pneumag that pneumagger modded for me. Must be close to a couple years now.

    Anyways I've recently gotten the itch to play aired it up, and it needs work. Its got an xvalve (which I havent any parts for) and the as mentioned pneu mag set up.

    Anyone offer services for fine tuning/replacing any parts etc?

    THanks!
  • rawbutter
    Registered User
    • Feb 2007
    • 1463

    #2
    What's wrong with it, exactly? You can probably do all the fixes yourself. Or, if no one else with more experience offers, you could send it to me and I could look at it for you. I wouldn't charge you anything but parts and shipping.

    Comment

    • cyberave68
      www.BigEvilOnline.com
      • Feb 2004
      • 1084

      #3
      Have you tried Pneumagger. He would prolly help you out.

      Rawbutter has a point,you could fix it pretty easy. What seems to be the problem? We could prolly walk you through what it needs...
      Zero Gravity Customs

      Play hard or go home......
      My feedback
      http://www.automags.org/forums/showthread.php?t=129891

      Comment

      • armyboot
        Registered User
        • May 2002
        • 175

        #4
        Honestly I've been so out of the loop I wouldn't know were to begin!

        Comment

        • cyberave68
          www.BigEvilOnline.com
          • Feb 2004
          • 1084

          #5
          Well beng you said it has been awhile i would begin to think that the o-ring in the MSV is prolly dry and needs a drop of oil. Next i would think the same about the LPR....
          Zero Gravity Customs

          Play hard or go home......
          My feedback
          http://www.automags.org/forums/showthread.php?t=129891

          Comment

          • armyboot
            Registered User
            • May 2002
            • 175

            #6
            Pretty sure you're right on both counts. Also have a leak down the barrel which means my lvl X is out of tune I think.

            Comment

            • cyberave68
              www.BigEvilOnline.com
              • Feb 2004
              • 1084

              #7
              yep sounds like you need to change your carrier size to a smaller one....
              Zero Gravity Customs

              Play hard or go home......
              My feedback
              http://www.automags.org/forums/showthread.php?t=129891

              Comment

              • ezcreation
                ezcreation.ca
                • May 2008
                • 1013

                #8
                Actually to be honest I have noticed that most leak down the barrel are more linked to the carrier oring. Quick change makes it better right away.

                Comment

                • armyboot
                  Registered User
                  • May 2002
                  • 175

                  #9
                  Well I'm afraid my paintball collection isn't quite what it used to be.

                  All I've managed to find is my pneumag, barrel, tank, and OLD Halo. No spare parts.

                  Comment

                  • rawbutter
                    Registered User
                    • Feb 2007
                    • 1463

                    #10
                    Well, you can send it to me, or cyberave, or pneumagger.... but trying oiling it and gasing it up first. It may still work fine. Post up questions if you have them. I still think you can probably get it working without sending it anywhere.

                    Comment

                    Working...