Round Two

[Ruler_Mark]

Thanks, Mark. Can you explain a little bit better? I'm holding it because I would like to know exactly what would I need to do to have it fit in there.

some internal milling I think

[Ruler_Mark]

Would this fit into a Z-grip or would I need to modify the frame?

You DEF have to mod a Z, many many ways too first inside wider then so it can sit deep enough then you might need a longer cheater rod

[Stayhuge]

This is pretty much a Drop in for a Chimera? right. Maybe just a few set screws. Thanks!!

[ZapTheMad]

This is pretty much a Drop in for a Chimera? right. Maybe just a few set screws. Thanks!!

It dropped in a Chimera for one guy no problem. I have another one coming in for install that won't quite fit. I'm not sure yet but it looks like the Chimera is just slightly narrower inside. I'll know more after I get a look.

Sooner or later I will put up a collection of install pics for reference.

[vf-xx]

This is pretty much a Drop in for a Chimera? right. Maybe just a few set screws. Thanks!!

I think it depends on which run of Chimera you have. I have one from the first run, and it's too narrow for a straight drop in.

If you have one of the later runs, it'll likely fit. Easiest way is to measure how wide your insides are from the top of the frame.

[maniacmechanic]

You DEF have to mod a Z, many many ways too first inside wider then so it can sit deep enough then you might need a longer cheater rod

I was wondering about this

[mpsd]

Good call.

Zap, can you please provide the outer width measure of your drop-in kit? This way I can measure the inside of my frame and place the order knowing that it'll fit.

Thanks!

[ZapTheMad]

Good call.

Zap, can you please provide the outer width measure of your drop-in kit? This way I can measure the inside of my frame and place the order knowing that it'll fit.

Thanks!

The Intelliframe is .550" wide inside. I machine them to .545" give or take a few thou's depending on accuracy of cut and how much I take off for surface clean up. Most will be between .542 - .547 wide with an oddball here and there. The piston bore is about .485" diameter so we don't have much room to work.

For best results you should send me your frame. Guaranteed perfect fit every time

I guess I can mill one to a custom width easy enough. Probably not less than .499" to fit a .500" frame. I can also leave the screw dimples out since they are for Intelliframe. I'll work on one of the rejected bodies and see how far I can take it down.

If you already placed an order let me know if you want a custom width.

[Stayhuge]

Hi, I placed an order. I am putting this in a Chimera. Not sure if it's the newer or older version. Can I get mine a little on the narrow side and with no dimples? Thanks Zap!!!

[Ruler_Mark]

OK, took some time and it does work on the triton. The screw dimples do not line up hence I thought at first the trigger geometry wouldnt work took some time tweaking its position in the frame and got it shoot. HOLY i thought it would be alike most other pnue frames but no its is E trigger weight.

[ZapTheMad]

Hi, I placed an order. I am putting this in a Chimera. Not sure if it's the newer or older version. Can I get mine a little on the narrow side and with no dimples? Thanks Zap!!!

Get me an exact measurement and I'll make it fit perfect. Send me an email so I get the right person. My list is by real name off the paypal receipt.

[ZapTheMad]

BTW I've had the flu and I'm a little behind getting started. I'm feeling better today and I should be able to get caught up this week.

[Ruler_Mark]

uggh I just got it together perfect........... I set it as far forward it can sit in the frame, sitting as low as possible, and level

[ZapTheMad]

I put up an "incomplete" user guide. Still working on it but its a start. Mostly need to just add pictures.

http://zapsmadhouse.freeforums.org/index.php

[motodrom16]

PLEASE CLEAN UP YOUR BOX


hi,
please check the costs incl shipping to me

i will take one + the following parts:
1. Black Hose - $2 per foot
2. Cheater O-ring kit - $2
3. Extra 10-32 fitting - $3 ( IF I NEED !?! )

shipped to germany.
can you please check it with USPS, it will cost around 5-8 bucks i think.

my feedback:
http://automags.org/forums/showthrea...ght=motodrom16

LMK, sir
thank you
rudi