New E-Mag/X-Mag board!!!!!!

[splat15k]

Each board will be pre-programmed and tested prior to shipping.

I will not be:
Installing each board into a gun and testing it.
The board will be powered on using a regulated power supply, a solenoid coil and plunger plugged in, a HES, and a multimeter with read outs on each port for each component will be used to test for polarity and connectivity.

None of your components will be plugged in and shipped as such.

You will have to assemble your marker and board as outlined.... And yes,... There will be photographic instructions posted so everyone can complete the job.

I am working on a manual as we speak.

Sounds perfect, Jai.

[knownothingmags]

freakin awesome man

[p8ntbal4me]

Pics!

[splat15k]

Those pictures are confusing me...what's with the large plated thru hole at the top of the board? Do we need to sand off the anodizing from the corresponding locating pin in our frames to connect it to DC RTN? I expected to only see that kind of pad toward the bottom of the board for the screw/ground connection (I'm sure there is one there, of course...just wondering what's up with the one in the pictures.)

[p8ntbal4me]

Those pictures are confusing me...what's with the large plated thru hole at the top of the board? Do we need to sand off the anodizing from the corresponding locating pin in our frames to connect it to DC RTN? I expected to only see that kind of pad toward the bottom of the board for the screw/ground connection (I'm sure there is one there, of course...just wondering what's up with the one in the pictures.)

The new pad is replacing that "hole" that was milled into the OEM PCB.
This provides the board with another ground option in the event it ever was needed.

It also secures the board as a better fit. The prototype doesn't move around at the top like the OEM board did.

Remember.... This is a drop in replacement for your marker..... No modification is needed......

[splat15k]

The new pad is replacing that "hole" that was milled into the OEM PCB.
This provides the board with another ground option in the event it ever was needed.

It also secures the board as a better fit. The prototype doesn't move around at the top like the OEM board did.

Remember.... This is a drop in replacement for your marker..... No modification is needed......

[knownothingmags]

kewl

[p8ntbal4me]

UPDATE

According to UPS,... The boards have arrived at my home.

I will take pictures later on once I check every board.

[p8ntbal4me]

UPDATE

The boards are here.

I got home late from work and I need to spend some time with my daughter before she goes to bed.

I will crack the box open tonight if I have time and see what's what,.... If not,... It will have to wait till tomorrow.

Sorry for the tease..... Gotta be a dad before anything else ;-)

[p8ntbal4me]

UPDATE

HERE THEY ARE!!!











And the best one is saved for last.....



Quality.... They are amazing!

[knownothingmags]

I see mine woohoo. just intime too. I have 3 emags, two on the way that need boards

[cougar20th]

UPDATE

HERE THEY ARE!!!

POPCORN. I see popcorn.

[BigEvil]

[p8ntbal4me]

I see mine woohoo. just intime too. I have 3 emags, all three need these amazing new boards

Fixed it for ya ;-)

[knownothingmags]

Fixed it for ya ;-)

well yeah that's why bought 3 boards