Luke's Armada Rails

[luke]

I'll take one pump milled am/mm rail and one rtp rail ... shipped to Sweden. I'm on the way to work, I pay when I get home again.
Thanks Johan

Did you want the RTP pump milled too?

[barkingspider]

I am interested in getting my name on for two aa/mm pump milled armada rails.

In terms of the 8" rail, is this the traditional length for a aa/mm rail? I ask this thing about the pump milling for the armada rtp rail and pump rod requirements.

[kwik175]

I will take an RTP style. No pump milling required.

[luke]

Yes, 8 inch is factory standard for the AM rail. Invoice in coming...

[need4reebs]

Factory AGD rails:
AM and RTP rails are different in thickness, the Automag is 0.555" thick. The RTP is 0.6422" thick. (mine are anyway)
The over-all design is identical, the diffrence is due to thickness and the shape difference on the bottom of the rails.
The AM bottom is designed for single screw ASA mount. It has a dovetail connection so the ASA will not spin when mounted.
The early AM frames also have a dovetail top.
The AM and RTP rails use different sears and sear pins.
The RTP has a 2 screw mount ASA.

I suggest you choose the rail that you can use your current sear and sear pin with.
If you're not sure which you have, post a picture of the sear and pin, that would be easiest.

since you already have tha rails there couldnt they all get a fore grip slot milled...that way tha fore grips can be moved forward/backwards depending on what for grip is being used as well as not having to send it back to get a slot milled later???

[swe_crazy]

No pump milling on the RTP, thanks

[TyeStick]

If you're not sure which you have, post a picture of the sear and pin, that would be easiest.

[luke]

since you already have tha rails their couldnt they all get a fore grip slot milled...that way tha fore grips can be moved forward/backwards depending on what for grip is being used as well as not having to send it back to get a slot milled later???

I can add that for a small fee if you want.

[luke]

You will want the RTP version.

[TyeStick]

You will want the RTP version.

Invoice please.

[C_losjoker]

Rtp pump milled pls

[alpha_q_up23]

Special Preorder pricing is as follows:
Armada Rails (raw) $65
Pump milling special add $15 per rail
Shipping, USPS Priority $7.50
Fees apply.

We need to sell at least 20 to hit this pricing.
Preorder rails are in the neighborhood of a $20 discount.
Pump milling is a 50% discount.
These prices will end at the close of preorder.
Project will complete and parts will ship within 1 week of preorder close.

AM Armada
Machined from 6061 billet.
8 inches long.
ULE milled.
Single hole ASA drilled.
Can be pump Milled.
Works with Hidden Eye Milling.



RTP Armada
Machined from 6061 billet.
8 inchs long.
ULE milled.
Two hole ASA drilled.
Can be pump milled.
Works with Hidden Eye Milling.


1. keiko_819- RTP- PAID
2. keiko_819- AM- Pump Milled- PAID
3. lobo_fuerte- AM- Pump Milled- PAID
4. Cali_Mag- AM- PAID
5. alpha_q_up23- AM- PAID
6. kwik175- RTP Armada- PAID
7. barkingspider- AM Armada- Pump milled- PAID
8. barkingspider- AM Armada- Pump milled- PAID
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19
20.

mine is pump milled.... my OCD decided to post this to make sure that gets fixed

[Laku]

I'll take one AM length pump milled. Shipping to Finland.

[keiko_819]

I prefer the slot milling also...how much more would the 'small fee' be?

[luke]

Guys, these are 8 inch rails, on the RTP rail, a slot will give you less than 1/16" travel.
On the AM you would have less than 1/8" forward, not exactly sure what you guys are after here.
????