KAM Designs M86 Run #2

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cougar20th
    Registered User

    • Sep 2002
    • 2330

    #1

    KAM Designs M86 Run #2

    KAM Designs M86 Run #2

    It appears there is enough interest in these to be able to do another Run
    Gloss Black


    Dust Black


    Raw


    Trigger, grip panels & screws included but not shown
    All parts will be anodized to match.

    Specs:
    • AGD Spec where it counts.
    • 86 degree (CCM based shape)
    • Mounting for Fabco MSV-2 & clippard MPA-3
    • Tapped for Sleeper LPR mount Capable. The frame will be tapped 1/8NPT on the bottom but. You will have to modify the MSV-2 & its mounting plate. It will not come modified.
    • Frame accepts 2X emag trigger magnets above the forward trigger stop.
    • Can be used on twistlock guns or non twistlock.
    • Sear release hole for use on pnuemags.
    • AGD Saftey compatable. (Safetey NOT Included)
    • All Stainless Steel screws/pins
    • Trigger included, Forward & back stop setscrews.
    • Grip Panels included.


    OPTION:
    This run I will allow the buyer to chose if they want "AO ARMY" Engraved on there frame. It will be in the same location as the "BEO Mafia" on this frame. On both sides. It will be in the same font as the AO ARMY jerseys are.
    It will be a additional fee. Going to the machinist for setup.
    That fee will be $30


    Other custom engraving is available but there will be a minimum number needed to be ordered. And price will need to be determined on complexity. Custom engraving is not available on orders of 1 frame.

    Now the specifics.
    As soon as I have enough spots filled I will have these started.

    Pre-order is only open for 1 month.

    Price will be $200 CLOSED


    Your choice of finish.
    Dust Black, Gloss Black or Raw (no discount for raw)

    $100 Payment to secure your frame due now.
    Absolutely No refunds. Unless the project falls thru then full refund will be made.
    $100 upon completion. Add $30 if engraving option is chosen.

    Time frame to Completion: TBD upon preorder finish & shop availability

    Post then PM me for payment info.
    Include: Both in PM & Payment notes: Your Address, your screen-name, Which forum, Your finish preference. Also please include M86 Run #2

    We need to fill a minimum of 10 Spots for these to be started.

    Spots
    1) Swiss Cheese: Gloss Black: AO ARMY: Deposit: $100 (extra grips & extra trigger gloss)
    2) Knownothingmags: Raw: AO ARMY: Deposit: Paid in Full
    3) Mole1119: Gloss Black: Deposit: $Paid in full
    4) RT Lover: Gloss Black: Deposit: $100
    5) maverick13: Gloss Black: Deposit: $100 (extra grips & extra trigger raw)
    6) Barkingspider: Dust Black: Deposit: Paid in full
    7) fierymartal: Gloss Black: Deposit: Paid in Full
    8) soulcoffin: Gloss Black: Deposit: Paid in Full
    9) goin5150: Gloss Black: AO ARMY: Deposit: $130
    10) Rschoi_75: raw: AO Army: Deposit: Paid in Full
    11) hawaiianking: Gloss Black: Deposit: $100
    12) OPBN: Raw: Deposit: Paid in Full
    13) Blamtro: Dust Black: Deposit: $100
    14) alpha_q_up23: Dust Black: Deposit: Paid in Full
    15) Sandman: Gloss Black: Deposit: Paid in Full
    16) Donut SD: Gloss Black: Deposit: Paid in Full
    17) Levi: Raw: Deposit: Paid in full
    18) Levi: Raw: Deposit: Paid in full
    19) Knownothingmags: Raw: Deposit: Paid in Full
    20) Cripes2: Gloss Black: Deposit: Paid in Full
    21) keiko_819: Gloss Black: Deposit: $100
    22)

    I am NOT limiting the production run. As many that are ordered will be made. Possibly some extras but no guarantees there.



    CLOSED
    Last edited by cougar20th; 09-12-2014, 05:49 AM.
    Originally posted by dano_____
    I keep forgetting to not feed my mags after midnight so they seem to multiply regularly.
  • Swiss Cheeze
    Happy Festivus!

    • Feb 2008
    • 461

    #2
    Interested pming you.

    Comment

    • knownothingmags
      RKM 3D Designs

      • Apr 2010
      • 4810

      #3
      I want one with ao army on it too. raw please.
      will get cash soon to you, please pm me if I miss paying you,
      got into a car accident and im really not all here yet.
      logoRKM 3D Designs

      Comment

      • cougar20th
        Registered User

        • Sep 2002
        • 2330

        #4
        Originally posted by knownothingmags
        I want one with ao army on it too. raw please.
        will get cash soon to you, please pm me if I miss paying you,
        got into a car accident and im really not all here yet.
        Oh damn hope your ok. Adding you to my lists.
        Originally posted by dano_____
        I keep forgetting to not feed my mags after midnight so they seem to multiply regularly.

        Comment

        • Mole1119
          Registered User

          • Jan 2004
          • 414

          #5
          I will take two, gloss black please.

          Comment

          • maverick13
            Registered User
            • Aug 2011
            • 534

            #6
            One gloss black for me.

            Comment

            • cougar20th
              Registered User

              • Sep 2002
              • 2330

              #7
              Replied to everyone.
              Originally posted by dano_____
              I keep forgetting to not feed my mags after midnight so they seem to multiply regularly.

              Comment

              • barkingspider
                Registered User

                • Mar 2012
                • 415

                #8
                Put my name on a dust black please. Let me know where to send deposit. Thank you for offering it up again.

                Comment

                • manwe33
                  Waiting 4 my LogicRipperEM
                  • Jul 2006
                  • 574

                  #9
                  Could you please do a thin or slim frame. Something with the width of what CCM does. If so i would buy one.

                  Comment

                  • cougar20th
                    Registered User

                    • Sep 2002
                    • 2330

                    #10
                    Originally posted by manwe33
                    Could you please do a thin or slim frame. Something with the width of what CCM does. If so i would buy one.
                    If I were to do that it would not be Pneumatics compatible. The parts just would not fit.
                    Originally posted by dano_____
                    I keep forgetting to not feed my mags after midnight so they seem to multiply regularly.

                    Comment

                    • Mole1119
                      Registered User

                      • Jan 2004
                      • 414

                      #11
                      Swiss Cheeze - I sent you a PM, lets just say I had a little botch trying to send my deposit for these frames.

                      Comment

                      • Chrome
                        Registered User
                        • Apr 2009
                        • 397

                        #12
                        Because I've never seen the CCM slim frame, how thick is it? Does the CCM thin compare to the stock CF AGD frames or are you talking even thinner than that?, Just to help me visualize, is the M86 comparable thickness to another mag frame? Considering where all the in-spec stuff is on the frame, some patience and a belt sander could probably get you down to a thinner frame with a raw one and a little work if you're handy with the tools?

                        Comment

                        • fierymartel
                          Registered User
                          • Jul 2005
                          • 452

                          #13
                          PM'ing!

                          Comment

                          • cougar20th
                            Registered User

                            • Sep 2002
                            • 2330

                            #14
                            Updated the list.

                            I never wuld have thought we would be 2/3 there in 24 hours.
                            Originally posted by dano_____
                            I keep forgetting to not feed my mags after midnight so they seem to multiply regularly.

                            Comment

                            • cougar20th
                              Registered User

                              • Sep 2002
                              • 2330

                              #15
                              Originally posted by Chrome
                              Because I've never seen the CCM slim frame, how thick is it? Does the CCM thin compare to the stock CF AGD frames or are you talking even thinner than that?, Just to help me visualize, is the M86 comparable thickness to another mag frame? Considering where all the in-spec stuff is on the frame, some patience and a belt sander could probably get you down to a thinner frame with a raw one and a little work if you're handy with the tools?
                              I dont know the thicknes of a ccm thin. My best guessis 1/2". Anyone want to verify that?

                              M86 is the same thickness as magnus m90, rpg chimera and others.I believe that number is 3/4" without grips but I would have to check the files on monday to verify.
                              Originally posted by dano_____
                              I keep forgetting to not feed my mags after midnight so they seem to multiply regularly.

                              Comment

                              Working...