Pnuemags!
Update: Currently out of stock, as soon as I get 3 paid orders, I will restock and they will ship in 5 days.
3 paid orders needed - PM for paypal address.
This kit includes nearly everything you need to complete your Pneumag, $72: Price includes shipping and Paypal fees.
I ship internationally! PM with your address for a total price shipped outside the US.
I have found a couple new suppliers and have significantly expanded this kit!
This includes multiple and extra elbows to accommodate different setups and trigger frames.
This kit includes a QEV to exhaust directly at the ram, much quicker than all the MPA's air having to feed back through the hose hole in the MSV-2 when you let go of the trigger.
Just like using a pair of QEVs on an autococker, it allows the MPA-3 to reset faster.
These are in-stock and ready to ship. Will ship within 2 biz days.
$72: Price includes shipping and Paypal fees.
Included shipping costs are for the US only via USPS. Please PM me for an international shipping quote.
1: Fabco MSV-2 + 2 mounting screws
1: Clippard MPA-3 with Ram + 4 mounting set screws
1: Clippard QEV
2: 1/16" straight low profile barbs
2: 1/16" straight barbs with hex
2: 1/16 90* barbs with hex
2: 10:32 plug (if you choose to tap the side of the MPA for space constraints) see pic below
1: 3 feet of urethane tubing 500 PSI burst - the good stuff
4: trigger rods: 2 aluminum, 2 steel. 1 of each material length for the KAM M86* frame, 1 of each material extra long you can cut down if you need a longer rod for your specific frame.
2: trigger stops: short 4:40 nylon tipped set screws
2: trigger stops: long 4:40 nylon tipped set screws
-you should only need 2 total, but the short and long will allow you to dial your trigger in to perfection
*these will fit the new KAM 86 frame as well as others*
Update: Currently out of stock, as soon as I get 3 paid orders, I will restock and they will ship in 5 days.
3 paid orders needed - PM for paypal address.
This kit includes nearly everything you need to complete your Pneumag, $72: Price includes shipping and Paypal fees.
I ship internationally! PM with your address for a total price shipped outside the US.
I have found a couple new suppliers and have significantly expanded this kit!
This includes multiple and extra elbows to accommodate different setups and trigger frames.
This kit includes a QEV to exhaust directly at the ram, much quicker than all the MPA's air having to feed back through the hose hole in the MSV-2 when you let go of the trigger.
Just like using a pair of QEVs on an autococker, it allows the MPA-3 to reset faster.
These are in-stock and ready to ship. Will ship within 2 biz days.
$72: Price includes shipping and Paypal fees.
Included shipping costs are for the US only via USPS. Please PM me for an international shipping quote.
1: Fabco MSV-2 + 2 mounting screws
1: Clippard MPA-3 with Ram + 4 mounting set screws
1: Clippard QEV
2: 1/16" straight low profile barbs
2: 1/16" straight barbs with hex
2: 1/16 90* barbs with hex
2: 10:32 plug (if you choose to tap the side of the MPA for space constraints) see pic below
1: 3 feet of urethane tubing 500 PSI burst - the good stuff
4: trigger rods: 2 aluminum, 2 steel. 1 of each material length for the KAM M86* frame, 1 of each material extra long you can cut down if you need a longer rod for your specific frame.
2: trigger stops: short 4:40 nylon tipped set screws
2: trigger stops: long 4:40 nylon tipped set screws
-you should only need 2 total, but the short and long will allow you to dial your trigger in to perfection
*these will fit the new KAM 86 frame as well as others*
Comment