Z2 Grip Frame

[luke]

Currently dialing in the trigger geometry on both triggers, should be ready for production soon.

[bowcycle]

Sounds good. Your triggers have always felt nice.
Thanks.

[luke]

So it looks like were ready to start production!

Z2P Blade Trigger (Pneumag Only)
Picture shown with safety engaged
Z2 Pneumag Blade Trigger.JPG

Standard Mechanical Blade Trigger
Z2 Mech Trigger.JPG

I have some very minor adjustments to make, then I need to setup new machining files for production and were off to the races!
Thanks for everyone's patience on this project.
I'll send out private messages to everyone this weekend to get your final orders dialed in so I can set up invoices.

Thanks

[ikillforwork]

Sweet. Will we get both triggers?

Sent from my SM-G955U using Tapatalk

[luke]

Sweet. Will we get both triggers?

Only one trigger per frame was included with your purchase but you can add extra triggers to your order. I'll include that price in the PM I send out this weekend.

[Walking Stick]

Doing any special engraving on the panels like a bunch of tiny Z's or any of your previous AGD-esque designs?

[luke]

Doing any special engraving on the panels like a bunch of tiny Z's or any of your previous AGD-esque designs?

No current plans but I'm sure I could be persuaded.

[awo702]

Looks pretty awesome luke.


Sent from my iPhone using Tapatalk

[luke]

Everyone on the list should have received a private message this morning except for kim pham I sent you an email..

[awo702]

[luke]

So I had to machine the LPR housing down because it was a smigen to large in diameter because it sits so far forward in the frame.
Z2 Machined LPR Housing.JPG

Stripped down weight of the Z2 is 5.4 ounces.
Z2 Weight.JPG

Complete build weight with pneumatics including: frame, trigger, return magnets, trigger pin and screws, safety assembly, T-Rex, LPR, Hose, grips, and grip screws, complete ready to install is 12.6 ounces.
Z2 Pneumag Weight.JPG

Grips and Z2P trigger
No short stroking this trigger!
Z2 Grips.JPG

[Walking Stick]

Any of you 21 want something other than those huge, blank, smooth grip panels? I know I'd like some textured design to give my digits extra traction while making the Z2 even more unique.

- Like one of Luke's previous designs: all Hexes, AGD Lion, AGD Hex Circle, et cetera.
- Or perhaps something new and original (please excuse the quick phone drawings):

First off, I think it needs a design running perpendicular to the grip hold orientation to give some friction whilst holding.


1) I like this with a short, wide "Z2." It can be smooth with just the Z-2 inner area lined to give a small friction area, or the Z-2 smooth with the surrounding in a Hex pattern or such.


2) A bigger Z-2 on an angle and again either the characters or background being textured?


3) Maybe Z-2 within Hexes on an angle with a textured background?


4) Or put the characters vertical so it's easier for Z virgins to see and try to comprehend.


5) A tall Z-2?


6) Something like this - a bunch of rows of continuous Z2's - but executed much better?


7) Perhaps little Z2/Lc/X/Hexagons arranged in a pattern like diamond plate steel or the Louis Vuitton logo?
---no scribbles here---

Luke told me there's time for this if something can be agreed upon since the panels will be the last pieces produced. I know it's a long shot to get a group consensus but maybe something will grab Luke's attention. So maybe then the option to go bland or graphic on your panels.

C'mon, let's make these boring panels a little bit more special for the Z2! (And save me another $60 for custom engraving...)

[ikillforwork]

I wouldn't mind something cool. Maybe a run just for the first 21. Z2 on textured background.

Any of you 21 want something other than those huge, blank, smooth grip panels? I know I'd like some textured design to give my digits extra traction while making the Z2 even more unique.

- Like one of Luke's previous designs: all Hexes, AGD Lion, AGD Hex Circle, et cetera.
- Or perhaps something new and original (please excuse the quick phone drawings):

First off, I think it needs a design running perpendicular to the grip hold orientation to give some friction whilst holding.


1) I like this with a short, wide "Z2." It can be smooth with just the Z-2 inner area lined to give a small friction area, or the Z-2 smooth with the surrounding in a Hex pattern or such.


2) A bigger Z-2 on an angle and again either the characters or background being textured?


3) Maybe Z-2 within Hexes on an angle with a textured background?


4) Or put the characters vertical so it's easier for Z virgins to see and try to comprehend.


5) A tall Z-2?


6) Something like this - a bunch of rows of continuous Z2's - but executed much better?


7) Perhaps little Z2/Lc/X/Hexagons arranged in a pattern like diamond plate steel or the Louis Vuitton logo?
---no scribbles here---

Luke told me there's time for this if something can be agreed upon since the panels will be the last pieces produced. I know it's a long shot to get a group consensus but maybe something will grab Luke's attention. So maybe then the option to go bland or graphic on your panels.

C'mon, let's make these boring panels a little bit more special for the Z2! (And save me another $60 for custom engraving...)

Sent from my SM-G955U using Tapatalk

[bowcycle]

I'm in for any design, but my preference would be the straight lines. Those seem easiest to match with multiple different builds.

[luke]

I always liked this

Z2 Grip Lines.JPG